Before lying on a warm bed at night, nothing can make our tired body feel more happy than a hearty bath. When the warm water gushes out from the shower and pats on the skin, it washes away the tiredness of the day , that was a wonderful treat! However, it is not always possible to “bath” as you like. Everyone knows that the water quality in China is average. After a long time of using the shower, it is easy to accumulate scale. Slowly, the scale will block the water outlet of the shower, resulting in a large amount of water. Smaller or even no water, which affects the effect of the shower. So how to solve such a problem? The editor compiled a few methods, you can try!
1. to stab with a sharp object
Directly use an embroidery needle or toothpick to pierce the small hole blocked by scale, and use the needle to pierce the impurities in the hole, so that the scale will fall off the inner wall of the outlet hole until there is no impurity in the hole, and then wash it with water. This method is the most direct, but be careful not to puncture the shower hole.
2. Soak in vinegar
Scale is formed by the accumulation of carbonic acid compounds in water, which can be neutralized with acid. When cleaning, pay special attention not to use strong acid (it is better to use white vinegar), so as not to cause corrosion on the surface of the shower. The vinegar at home is a good weapon to remove scale. Soak the shower head in vinegar for as many hours as possible, so that the scale in the shower head can be removed.
3. Remove it and brush it with a toothbrush
If the shower at home can adjust the size of the water, there should be a software ring in the middle, close it tightly, and then turn it counterclockwise (or clockwise), so that it should be able to be removed, and then gently brush it off with a toothbrush The scale inside should be cleaned and reinstalled.
In addition, in order to ensure that the shower head is not blocked, it is best to clean the shower head every six months or less. Do you think it is troublesome and costly? Instead of removing it by hand every now and then, it is better to start with an Anhua bathroom self-cleaning shower head to completely solve the scale problem!
4. Choose a self-cleaning shower
Aiming at the domestic water quality, Anhua Sanitary Ware has developed a self-cleaning shower head with a self-cleaning needle plate, so there is no need to worry about scale. Self-cleaning principle: the water pressure is 0.5KG and above, the self-cleaning needle disc will continue to run automatically, driving the air inhalation, and at the same time, when the needle disc is pushed out during the movement, the water can be discharged; using this up and down movement, the continuous water flow forms an interval of 3 seconds The left and right segmental water outlets fall in the form of a rain shower, which increases the water flow in the shower and provides a comfortable feeling of pulse massage!
As the water outlet hole is blocked by scale, the water output of the shower is gradually decreasing. Anhua suggested: choose Anhua self-cleaning shower head to solve the scale problem from the source, so that you can “bath” as you like all the time!
