With the improvement of the quality of life, people pay more attention to the decoration of the bathroom. In fact, the decoration design of the bathroom can reflect a person’s taste, so today Fuwo Home Furnishing.com summarizes six small details of bathroom decoration, hoping to help you create a bathroom boutique, let’s take a look below.
1. Construction skills of bathroom threshold
The threshold is the first pass in the bathroom. It plays the role of waterproofing and dividing the space in the bathroom. It also has the meaning of gathering wealth in Feng Shui. The key points of the construction design of the threshold are to pay attention to the inclination of the plane on the threshold to the inside of the bathroom, so that the water can slide smoothly to the floor drain inside the bathroom. The second key point of threshold construction is to have the same width as the door frame, and the door frame must have the same thickness as the wall, so that the size can be consistent when laying floor tiles, which is very effective in preventing breaches.
2. Waterproof construction skills for bathroom floor
At present, the materials used for ground waterproofing are mainly waterproof agents. When laying the bathroom waterproof layer, it should be spread to 20 cm above the foot of the wall, and the height of the waterproof layer should not be lower than the height of the threshold. When the floor oil reserves the pipe, the waterproof layer should keep the reserved pipe. After the waterproof layer is completed and dried, it should be primed with cement mortar immediately to prevent the waterproof layer from being damaged.
3. Details of laying floor tiles
When laying floor tiles, pay attention to the thickness of the joints of the floor tiles and align them with the joints of the wall tiles; the floor tiles must have a drainage slope. If a bathtub is installed in the bathroom, the front wall of the bathtub must be made of bricks. It is best to stick it to the bottom of the wall first, and then stick the bricks to avoid breaches.
4. Laying details of bathroom circuit
The wire joints in the bathroom should be hung with tin, and should be wrapped with waterproof tape and insulating tape successively to ensure safety and prevent leakage. Therefore, the wire body must be covered with a flame-retardant tube, and the switch and socket should preferably have a moisture-proof box, or be installed in a dry area.
5. Details of bathroom wall tiling
Moisture-proof and waterproof should also be done before tiling the wall. When tiling the wall, the wall must be flat and must be aligned with the floor tiles to ensure the integrity of the wall and the ground.
6. Construction details of bathroom floor drain
Generally, when the new house is handed over, the reserved holes for drainage are relatively large, so it is necessary to pay attention to repairing the reserved holes for drainage so that they match the floor drains bought back. In order to prevent the entry of hair, sludge, sand and other dirt, the hole diameter of the repaired floor drain grate should be controlled between 6-8mm.
I hope the above content can bring you substantial help, and thank you very much for your trust in me. If you want to know more decoration knowledge and decoration prices, please pay attention to Fuwo Home Furnishing Network, thank you for your support!
