In modern times, many people like to take a bath, think that taking a bath can better relieve the fatigue of the day, in order to better take a bath, the choice of bathtub is very important, there are many bathtub materials, acrylic is one of them, the following by PChouse to tell you how to choose and repair the acrylic bathtub.
First, how to choose acrylic bathtub
1, style and display size
Acrylic bathtub style variety, rectangle, triangle, circle, change shape; Style classical, modern, European, Japanese, installation methods have embedded, placed, etc., there are more options, according to the specific bathroom decoration style and the toilet basin with.
2. Water capacity
The general full water capacity is about 230 ~ 320L. The water should be shoulder-free in the bath. If the length of the bathroom is insufficient, a bathtub with a larger width or a deeper depth should be selected to ensure that the bathtub has sufficient water.
3, bathtub body quality
Acrylic bathtub cylinder body is composed of surface layer (acrylic layer) and inner layer (glass fiber resin reinforcement layer) composite, good quality acrylic bathtub surface layer inner layer is closely combined, not layered, gently knock no hollow sound, surface smooth like porcelain, flat like a mirror, backlight, the plane has no rolling pattern, polishing pattern, face no warp, arc curvature standard, cylinder body thickness uniform, light weight, Strong and elastic, the paste layer inside the cylinder body should be smooth with the hand, do not drop powder, do not cut the hand, the skirt and the cylinder body joint tight bite, the gap is consistent.
Second, how to repair acrylic bathtub
1. Scratches are light
In case of accidental scratches on the surface, if the scratches are light, brush lightly with toothpaste and toothbrush
2, scratches are heavy
If it is scratched, choose different numbers of sandpaper (such as 800 #, 1000 #, 1500 #, etc.) according to the scratch degree, if the scratch is deep, you need to use a blade to process and then use sandpaper. The number of sandpaper used in the last line is generally 1500 # or 2000 #. The process of sand requires water, that is, water grinding. And the direction of the grinding process is also required. The final polishing is done with a special wool polishing wheel and a special polish.
3. Cracks appear
Acrylic bathtub in the process of use, if there is a crack accidentally, it should be repaired in time, first of all, the crack should be glued. When bonding, it is best for two people to clean up the crack first, and gently scrape it off if there is glue. Then force the two parts to align, glue, repair and color.
Acrylic bathtub in the choice can be from the style, capacity, quality three aspects to choose, in the daily use we have to take good care of it, otherwise there will be scratches, scratches do not panic, PChouse above to give you a few solutions, you can refer to it.
