HOMENews

All kinds of cleaning tips to share with you

All kinds of cleaning tips to share with you

2023-06-21 04:06:22

1. Once water enters the teak floor, it expands, cracks and bends. When cleaning, just wipe it clean with a damp rag and then dry it with a cloth. If you want to keep the floor shiny, you can wax it regularly.

2. Cement and stone floors can be brushed with a nylon brush dipped in detergent or soapy water.

3. Tile floors can be waxed to keep them shiny, but after washing them with water, make sure the floor is dry so that residual water does not slip off.

4. Plastic floors should be waterproof. After cleaning and brushing, the water must be evaporated as soon as possible to prevent the chemical action of detergents, water and colloids, resulting in the floor surface degumming or tilting.

5. The leather sofa can be lightly rubbed with a damp cloth. If there is grease, you can dab it with diluted soapy water, but do not rub it with hot water to avoid deformation of the leather.

6. There are many kinds of walls and ceilings, but the treatment method of cleaning and maintenance can only be summarized as water washing, not water washing. Walls and ceilings that can be cleaned with water include: wood walls, colored tiles, and ceilings. To clean, wipe gently with a damp cloth and dilute with soapy water. Do not use force to avoid damaging the surface. Walls that cannot be washed, including: powder walls, wallpaper walls, only need to use a feather duster to dust off from top to bottom when cleaning.

Seven. Wood furniture can be sprayed directly on the surface of the furniture with water wax water, and then dried with a soft dry cloth, the furniture will become bright.

8. Sofas made of plush fabric can be dipped in a little diluted alcohol brush with a brush and dried with a hair dryer. If the fruit stain is mixed with a little baking soda and water, it can be scrubbed off.

9. Doors and Windows are the most direct entrance to the outside wind and frost. So it’s also the easiest to get dirty. In case of oxidation and rust, the aluminum rust can be scraped off with a knife, and then cleaned with soap, dried with a dry rag, waxed and polished, shiny as new.