Do you have a headache when choosing a basin mixer? The editor will teach you a few tricks now.
Selection of Basin Faucet
1. Look at the appearance: the surface chrome plating process of a good faucet is very particular, and it is usually completed after several processes. The quality of the faucet depends on its brightness. The smoother and brighter the surface, the better the quality.
2. Turn the handle: When turning the handle of a good faucet, there is no excessive gap between the faucet and the switch, and it is easy to open and close without slipping. However, inferior faucets not only have a large gap, but also a large sense of obstruction.
3. Listen to the sound: the material of the faucet is the most difficult to distinguish. A good faucet is cast copper as a whole, and the sound is dull when tapped. If the sound is very brittle, it must be made of stainless steel, and the quality will be a grade worse.
4. Identification mark: If you really can’t tell the difference, you can choose a more formal brand. Generally, regular products have the brand logo of the manufacturer, while some informal products or some low-quality products are often only pasted with some paper labels, or even without any marks, so you must pay attention when purchasing.
Cleaning of basin faucets
1. Cleaning can be done with a mild detergent (such as dish detergent). Do not use ammonia, acid or bleach-containing cleaners or abrasive cleaners.
2. Rinse and keep the entire surface dry.
3. Materials that have undergone hardware surface treatment should be cleaned with Windex original lotion.
Basin faucet maintenance
1. Please have experienced and qualified professionals to install.
2. A strong barrier does not necessarily mean a tight barrier. Closing too tightly will damage the sealing valve and cause the faucet to not close tightly.
3. It should be avoided to allow water to evaporate on the metal surface by itself. Otherwise . Stains will be left on the metal as the water evaporates.
4. Those on the metal surface should be wiped gently instead of hard.
5. Clean it with a sponge, and then dry it with a cloth to maintain the beauty of the product.
