In the process of home decoration and bathroom decoration, the decoration of Yuba is naturally inseparable from the wiring diagram of Yuba, because the wiring of Yuba requires certain skills, so here is the correct way to decorate Yuba. In the Yuba wiring, we remove the light bulb and then remove the Yuba, but I still want to share with you some details that should be paid attention to when connecting the Yuba. Remove the visor Unscrew all bulbs, disengage the spring from the visor ring and remove the visor. Of course, it is worth noting that when removing the mask or installing the light bulb, you must pay attention to the stability of the degree and not use too much force.
In the wiring diagram of Yuba, we can find that the wiring wires of Yuba are divided into three lines: ground wire, neutral wire and live wire, which must be distinguished in the wiring. Looking at the top of the socket in the wiring diagram, the yellow and green colors are Yuba The ground wire, and the blue-black wiring is the zero wire of the Yuba. When connecting, pay attention to the screw port of the lamp head. The lowermost direction on the right side of the socket is the live wire, so try to connect it to the third switch in the wiring. For the three switches of the Yuba, the distribution of the wiring is different. At the same time of wiring, the soft wire of the wiring must connect the switch surface of the Yuba carefully. And remove the power circuit of the Yuba from the direction of the opening. Then follow the directions indicated in the wiring diagram, connect the wires, and cover the post cover. In order to achieve a fixed effect, try to use screws to keep the column cover in a stable state.
From this, we can find that the Yuba wiring is very professional, and the necessary wiring must be carried out in full accordance with the Yuba wiring diagram. Pay attention to potential safety hazards and balance of strength during wiring.
