Shower is one of the must-have products in modern bathrooms, and hand shower is one of the most commonly used products in our daily life. Usually, the shower we use will produce a certain amount of scale and impurities inside the shower due to the long-term water flow. Then we have to learn the maintenance of the shower, and mastering the maintenance skills of the shower can make the shower last longer. Let’s take a look with the editor to understand how to maintain the shower and the correct way to maintain the shower.
1. Removal of limescale: every half a year or less, remove the shower head and place it in a small basin, water the surface and inside of the shower head with edible white vinegar and soak it for 4-6 hours, then gently wipe it with a cotton rag At the water outlet on the shower surface: after re-installing the joint, let the water flow for a while, and wait for the white vinegar and scale to flow out with the water, so as to eliminate or reduce the influence of the scale on the shower, and can have a certain bactericidal effect.
2. Maintenance of the electroplating surface of the faucet: often wipe the electroplating surface of the shower with a soft cloth and a little flour, and then rinse with water to make the surface of the shower as bright as new.
Matters needing attention: ①, please pay attention to yourself and the safety of the product when disassembling and assembling the shower; ②, the filter gasket cannot be used with too large or too fine mesh, too large may not have the effect of filtering, too fine may affect Flow, the size of the filter screen is appropriate to 40-60 mesh.
3. Do not use strong acid when removing scale, so as not to cause corrosion to the shower surface.
4. Do not disassemble the shower head for maintenance by yourself. Improper disassembly will damage the appearance and internal structure of the product.
5. The ambient temperature of the shower should not exceed 70℃. High temperature and ultraviolet light will greatly accelerate the aging of the shower head and shorten the service life of the shower head, so the installation of the shower head should be kept away from the heat source of electrical appliances such as Yuba as much as possible. The shower cannot be installed directly under the Yuba, and the distance should be more than 60CM.
