Toilet backfill ceramic is a special engineering material, mainly used in toilets and places where much water will be used. The advantages of this material are very many, first of all, the quality of the toilet backfill ceramic is very light, so it is very convenient to use, and will not cause any pressure to the environment, followed by the toilet backfill ceramic water absorption and pollution absorption ability is very strong, this property can ensure the bathroom clean and tidy. The following Xiaobian will introduce the price of bathroom backfill ceramics and the filling steps of bathroom backfill ceramics.
The price of toilet backfill pottery
The price of toilet backfill ceramide is 320 yuan/cubic meter. (Price source network, for reference only.)
Filling steps of toilet backfill ceramisite
Bathroom ceramic backfill step 1: do two times waterproof paint, these two times waterproof (waterproof to do 2 times, once below, once above, each brush 2 times), be sure to do together with the wall, the height of the wall to be higher than the caisson along the upper 40 cm. Ensure that the water from the upper layer does not spread to the surrounding area, and can only be discharged into the floor drain.
Toilet pottery backfilling step 2: red brick or concrete to do the partition overhead, the caisson is divided into a number of 400*400 grids. Many people do not do this step, in fact, this is a very important step, with such a load-bearing partition, the concrete above will not fall. Otherwise 2-3 years after the bathroom floor subsidence cracking water leakage, sinking 1 mm can tear the previous waterproof layer, water leakage tragedy from now on (this case is too numerous to mention)!
Bathroom ceramic backfill step 3: fill ceramic or ash slag (it is appropriate to choose lightweight but non-absorbent materials, eliminate absorbent materials air brick light brick, etc.). Fill the moisture-proof ceramic particles and lattice inside, do not press too tightly, naturally, because it is not load-bearing, only sound insulation and filling.
Step 4 of bathroom ceramic backfill: reinforcement (the best solution – using the process of planting reinforcement on the floor ring beam). A layer of 300mm*300mm steel mesh composed of 8-10mm diameter steel bars is placed on the top of the grid to ensure the firm and uniform force of the concrete layer.
Step 5 of toilet ceramic backfill: ramming concrete layer, adding vibration pump construction, 10CM thickness of C30 fine stone concrete leveling. This layer to do water slope, do two times waterproof paint, even the wall to do together, after the waterproof layer is dry, to brush a plain cement slurry to protect it, so as not to scratch when paving tiles and porcelain tiles. After the protective layer dries, you can get on and do the next step of tile laying.
The above Xiaobian gives you a look at the price of toilet backfill ceramics in the market, and what is the step of using toilet backfill ceramics to fill. Good toilet backfill ceramic material can make everyone’s bathroom to maintain a clean and tidy no odor state, so the use of toilet backfill ceramic in the bathroom is very necessary. Good quality bathroom backfill ceramic, but also have high-quality filling steps to play the greatest role, so we had better ask professional personnel to fill the work.
