First, how to distinguish between good and bad bathroom cabinets
1, it is best to choose wall hanging, cabinet legs higher or with wheels, which can effectively isolate the ground moisture.
2, to understand whether the selected metal parts are stainless steel or aluminum products for bathroom cabinets after moisture-proof treatment.
3. The plating on the exterior of bathroom cabinet hardware should be selected as far as possible to pay attention to the work and the plating is 28 microns thick copper chromium, which has a tight structure, uniform coating and good use effect.
4, check the bathroom cabinet hinge opening degree. Under normal circumstances, when the opening degree is 180 degrees, it will be more convenient for us to take and place items.
5, ensure the maintenance of the inlet and outlet water pipes and the opening of the valve, do not leave trouble for future maintenance and overhaul. It is recommended to accurately understand the size of the bathroom and determine the placement of the bathroom cabinet, then measure the maximum size that can be placed, and choose the appropriate bathroom cabinet. Dry and wet separation, close to the bath, or no shower room of the bathroom, the selection of materials are different. It is recommended to choose a suitable bathroom cabinet after determining the bathroom decoration style. The style of the bathroom cabinet is rich, and the style of the wash basin is also very many, each has its advantages and disadvantages, so it is necessary to understand and choose again, so as to avoid problems in future use.
Second, how to install the bathroom cabinet
1. Confirm the installation position of the bathroom cabinet
Before paving the floor tile and wall tile, it is necessary to confirm the installation position of the bathroom cabinet, because the installation of the bathroom cabinet is to drill holes in the wall, but also need to enter the water hole and drainage hole, once installed generally can not move the position, so confirm the installation position of the bathroom cabinet is a necessary condition before installation.
2. When purchasing a bathroom cabinet, confirm the shape and size of the bathroom cabinet according to the installation location
After the location of the bathroom cabinet is determined, the shape and size of the bathroom cabinet can only be determined according to the installation location.
3, identify the pipeline diagram of the water pipe and the line diagram of the wire
The installation should be drilled on the wall with a punching drill, so it is important to confirm the pipeline diagram and line diagram before installation. If the water pipe or wire line diagram is broken, part of the wall tile will be pry open, causing unnecessary losses.
4. Confirm the installation height of the bathroom cabinet
The standard installation height of the general bathroom cabinet is 80~85cm, which is calculated from the floor tile to the upper part of the basin, the specific installation height is also determined according to the height and use habits of family members, but in the standard height range is the most appropriate.
5, bathroom cabinet accessories and installation
The accessories and installation of each bathroom cabinet are different, that is, the punching size of the same model (the size of the hole opened to the wall) is not the same, but the installation process is basically the same.
It can be seen that the quality of the bathroom cabinet can be handled by understanding whether the selected metal parts are stainless steel or aluminum products dedicated to the bathroom cabinet after moisture-proof treatment. In addition, the installation of the faucet needs to pay attention to steps to avoid wrong operation.
