For the aesthetics of interior decoration, bathroom ceilings are essential. At present, there are many ways to decorate bathroom ceilings. So what problems should we pay attention to when choosing bathroom ceilings? The following will give you a detailed introduction to the problems related to the selection and installation of bathroom ceilings.
One: Things and skills that need to be purchased for the overall bathroom ceiling:
1. Lamp warmth: The material of the lamp surface is generally made of quartz hard glass, and the manufacturer will use different types of quartz hard glass. When we choose, we mainly look at whether the surface of the lamp is average. If the surface of the lamp is uneven, it may cause an explosion. One is to see if the joint of the double thread and the lamp body is tightly combined.
2. Ventilation: The bathroom is a relatively humid environment when taking a shower. Generally, the ventilation fan has 2 gears. The high-grade can quickly remove the water vapor in the bathroom, and the low-grade is mainly used to eliminate the odor of the bathroom.
The most important thing about ventilating fans is to look at the noise of the motor. The general motor is an oil-impregnated bearing, which belongs to sliding friction, which will generate relatively large noise, and will resonate with the ceiling. Some brand motors use ball bearing motors, which belong to dynamic friction, and the frictional resistance is smaller than that of sliding friction. It is characterized by low noise, which is lower than the current international standard, and the other is long service life.
3. Air heating: The air heating also depends on the blowing system, whether it can send the hot air to 1.8-2M, because the air supply requirements of the general air heating must reach such a range of 1.8-2M. In this way, the user will not feel that the temperature of the lower body is not enough when taking a bath.
4. The material of the bathroom gusset is aluminum, which can be divided into three categories: sandblasting, roller coating, and lamination. Sanding is directly drawn on the aluminum material, and the surface is oxidized, which can avoid rusting. Roller coating requires 3 rolls and 3 rolls in the production process. In layman’s terms, it is to paste the film 3 times and do 3 rolls. The production process of the film-coated board is made of imported PVC film and overcoating color paint. The surface pattern is rich in color and has the advantages of abrasion resistance, stain resistance, and convenient scrubbing. Now there is also a kind of silver plate, which is a kind of anti-penetration and seepage plate, a bionic technology, just like lotus leaves, the water droplets will not condense on it, but will directly roll down.
Two: Construction and installation of the overall bathroom ceiling:
In terms of color, the gusset is divided into light color and dark color. As for how to choose the color, it depends on the preference that matches your bathroom. Before heating, turn on the corresponding equipment switch to test the machine. If the light is warm, it should be turned on for 15 seconds to see if there is a sense of heat. If there is, it will be no problem. After the air heater is turned on, you should feel whether there is hot air at a distance of 1.8-2M from the air heater. If there is, it will confirm that the air heater is normal.
The ventilating fan should be turned on at the high and low gears to listen to the size of the noise, whether the noise is relatively quiet, and whether there is any strange sound. The gusset depends on whether it is flat at the electrical joints and whether the overall assembly line is smooth.
In terms of installation, the overall bath top requires an interval of 2.3-2.5 meters from the ground, which is the best heating effect. If the height is too low, it will burn the top of the user’s head. Check whether the entire ceiling is smooth, and the electrical appliances should be staggered from the pipes to ensure the appearance, and the pipes should be blocked in the ceiling as much as possible. This kind of installation is generally installed by the store for free, but if there is a special-shaped installation, it will be charged. Certain special-shaped installation process costs. The so-called special-shaped installation means that the pipes of some bathrooms may be very special, and they protrude a lot downwards. It is necessary to make a corner package to achieve a beautiful appearance as much as possible.
Bathroom ceiling installation precautions
1. The purchased aluminum gusset and its matching keel and accessories should meet the product quality requirements and must not have bending deformation.
2. The bathroom is a place for bathing and washing. The ceiling of the bathroom should be made of metal, plastic and other materials.
3. When installing the aluminum gusset, if there is a deviation in size, it should be adjusted first and then inserted in order, and must not be inserted hard to prevent deformation.
4. Large lamps, exhaust fans and other objects should be fixed by keel alone, and should not be placed directly on the aluminum buckle.
5. When suspending the ceiling of the bathroom, pay attention to the opening of the Yuba (the square gusset does not need to be considered so much).
The above are the questions related to the purchase and installation of bathroom ceilings shared with you, hoping to help you.
