First, bathroom mirror installation precautions
1. Once the bathroom mirror is installed, please do not move and remove it at will, and do not impact the mirror with items to avoid breaking and hurting people; The floor-to-ceiling bathroom mirror can be moved, but it needs to be completed by multiple people, and the placement Angle is the same as before moving, and children should not be allowed to approach or push and pull the floor-to-ceiling mirror alone. Therefore, in the bathroom mirror must be prepared in advance of the setting plan, so as not to change the environment of the bathroom space.
2, when installing, you can use expansion bolts, pay attention to the type of tile when drilling, if it is all porcelain to use rhinasters, little by little, otherwise, it is very easy to crack. If you use glass glue to fix, do not use acid glass glue, you should choose neutral glue, acid glass glue usually reacts with the material on the back of the mirror, resulting in specular mottling. Before applying glue, it is best to do a compatibility test to see whether the glue is soluble with the material, and the best effect is to use a special mirror glue.
3, pay attention to protect the wall. When installing, be careful not to damage the wall, especially when hanging a mirror on the tile wall, and try to choose holes at the material joints. It is best to use rhinestones to drill holes.
4, the mirror in the bathroom is best to add a frame, if not add a frame, you need to do sealed waterproof treatment.
5. In addition to installing ordinary mirrors, it is recommended to install a magnifying glass that can be stretched above the wash basin.
6, when bathing, the mirror in the bathroom is blurred by steam smoke, you can apply soap on the mirror, and then wipe with a dry cloth to prevent the mirror from blurring.
7, the bathroom mirror generally has a good lighting, so the mirror headlight or mirror side lights are very necessary. When installing mirror headlights, pay attention to prevent dazzle, it is recommended to install lampshades, or choose a lamp with a frosted glass surface.
Second, the fixing method of the bathroom mirror
First measure the hook distance behind the mirror, and then make a mark on the wall, and punch holes at the mark. If it is a ceramic tile wall, you need to drill the ceramic tile with a glass drill bit, and then use a percussion drill or an electric hammer to drive 3CM, put the plastic expansion tube into the eye, and then screw on the 3CM self-tapping screw, leaving 0.5CM outside, and then hang the mirror.
Bathroom mirror in the installation should pay attention to the use of glass glue and tile, drilling also need to pay attention to the wall, if there is a need to install bathroom mirror can refer to the above content.
