1. Advantages of bathroom partition door
1. Allocate space reasonably
The use of such products can make a good separation of the bathroom, effectively realize the utility of reasonable allocation of areas, but also meet the needs of people when washing and bathing at the same time, the dry and wet areas are obviously separated, can keep the dry area dry, prevent water stains.
2, easy to clean
It is also more convenient to clean, just wipe it with a wet cloth gently, at the same time, its dirt resistance is also very strong, not easy to fall ash, usually 2-3 months cleaning once is not a problem, in addition, pure transparent, undecorated glass will be the decoration in the bathroom at a glance, showing a unique decoration style, people can also capture the outdoor situation when bathing, This design reflects a kind of personal and personalized characteristics.
Second, how to install the bathroom partition door
1, we can according to the requirements of the plane layout, we should line the wall and the ground, accurately determine the installation position of the side rail and the ground rail, ensure that the horizontal and vertical, and move the side rail to the line, and drill the wall face directly with a hammer drill through the hole in the slot.
2, restore the side rail, and then slide into the side column Angle code at both ends of the sky beam and the ground rail; Move the side cover (first connected to the middle column) into place, and the lower end of the side cover is close to the end of the ground rail.
3, the level is an important tool, the side sealing edge, side rail, side cover to play vertical, sky beam, ground rail to ensure horizontal projection overlap.
4. Connect the sky beam and ground rail with the side sealing edge and side cover through the side column Angle code, and then put the middle column into the sky beam and ground rail trough, and then slowly beat the middle column. Put the large glass cover into the trough of the ground rail, the left and right gap is stuck in the middle column, and the large glass column is stuck in the middle column.
5, finally put the module into the ground rail trough, put the beam and the large glass cover, buckle the horizontal and vertical short strips; The top layer module is installed and the top edge is fastened and the top cover is fastened. Then take off the vertical short batten, knock the long vertical batten into the middle column, take off the horizontal short batten, knock the long horizontal batten into the beam.
The installation of partition doors also requires skillful control. A good partition door can make the bathroom more reasonable layout, bathing more convenient.
