In the family of the current society, the bathtub is no longer a simple bathing tool, but also an attitude to life, a quality of life that pursues physical and mental comfort. The installation of the bathtub is not exactly the same as that of other sanitary ware. There are some tips for the various accessories and installation forms of the bathtub. Here are some tips for the installation and construction of the bathtub and the details of the construction of the bathtub.
1. The water pipe of the bathtub
The water pipes installed in the bathtub should be selected correctly. It is recommended to use a slightly inverted S-shaped pipe for the bathtub’s sewer pipe, which can effectively prevent the sewer from returning to odor. However, when using it, you should also pay attention to hygiene. Items fall into the sewage pipe of the bathtub, and the cleaning of the S-shaped pipe is also troublesome.
2. Installation of bathtub water fittings
To install the bathtub, you must first install the drain fittings, fill the bathtub with water, turn off the drain, and check for water leakage. When the water overflows the overflow, the water in the bathtub will flow out from the overflow. At this time, reach out to Under the tub, feel for the back of the overflow to see if any water is leaking from here. After the overflow test is passed, the next step is to check the airtightness of the sewer. You can choose to stand still to observe the airtightness of the sewer.
3. The bottom treatment of the bathtub installation
The material of the bathtub generally has fast thermal conductivity, which will affect the temperature of the water in the bathtub. Therefore, it is necessary to pave the bottom of the bathtub with river sand and pound it firmly. This will not only make it more stable, but also reduce its heat transfer rate. During the construction process of sand filling, first use glass glue to seal the water outlet, and then use plastic cloth to wrap the water outlet and the water pipe completely, and then tie them firmly with adhesive tape, which can effectively prevent sand from leaking into the water pipe.
4. Bathtub installation levelness skills
Putting a bathtub is different from other bathroom products. Other products are required to be on the same level, stable and beautiful. However, the installation of the bathtub needs to make one end of the drain slightly lower than the other end of the drain, so that the sewage will not be drained smoothly in the future. However, this also depends on the situation, because the bottom of a normal bathtub has a drainage slope, so you need to read the instructions carefully before installation to see if it is installed on a parallel line.
When we install the bathtub, we should not only pay attention to the quality and type of the bathtub, but also the installation process. If there is any negligence, the later rework process will be more troublesome. The above content summarizes four tips for installing the bathtub. Everyone has helped to create a world of bathtubs in the bathroom.
