0
In modern home life, it is very necessary to learn and master certain bathtub material identification and bathtub maintenance methods, so as to gradually improve the quality of home life, and even further realize the quality of life. Today’s main introduction is, so in order to make our life better, you and we know more about it.
Bathtub material identification
1, acrylic cylinder: artificial organic material manufacturing.
Advantages: Rich shape, light weight, soft color, good surface finish.
Disadvantages: artificial organic materials have the disadvantages of poor high temperature resistance, no wear resistance, easy aging of the surface, and easy to change color.
2, steel plate bathtub: is formed with a certain thickness of steel plate, and then {HotTag} on the surface of enamel plating.
Pros: Cheap to build. Because its surface is enamel, not easy to hang dirty, easy to clean, not easy to fade, luster lasting.
Disadvantages: Because the steel plate is particularly thin, the thermal insulation performance is not good, so some also add insulation layer.
3, cast iron cylinder: cast iron manufacturing, surface covered with enamel.
Advantages: Easy to maintain, use is not easy to produce noise. Because the cylinder wall is thick, the insulation performance is also very good. And cast iron cylinder gloss is good, the service life is the longest of the three cylinders.
Cons: The most expensive. Also because the cast iron cylinder is very heavy, it is not easy to move and move, so the installation process is very troublesome and easy to be damaged.
4, wooden bathtub: often choose wood hard, high density, anti-corrosion performance of the material.
Advantages: strong insulation, deep cylinder, full infiltration of the body.
Disadvantages: high price, need maintenance, deformation and leakage.
Methods of bathtub repair
1. The bathtub is usually blocked by foreign bodies in the tap if it is not filled with water, so the maintenance method is to clean foreign bodies;
2. The maintenance method of bathtub leakage is to check whether the faucet spool and sealing rubber ring are damaged, and then replace them;
3, the Jacuzzi is not electrified is generally the power line contact is bad or the power circuit leakage, the corresponding maintenance can be carried out;
4, if the hydraulic size of the Jacuzzi can not be adjusted, then it is likely that the suction of the pump is not enough, the need for inspection and maintenance, or the nozzle is blocked, dredging can be restored to normal.
5, bathtub crack maintenance: the causes of bathtub cracks are divided into cold cracking, hot cracking, impact cracking, but no matter which kind of crack causes, its crack maintenance methods are the same.
If the crack is serious, it is recommended to ask professionals to carry out maintenance; For small cracking, you can use the adhesive of the corresponding bathtub material to bond, of course, to choose non-toxic and harmless adhesive to the human body. The bathtub can be cleaned and wiped dry after the use of adhesive, until it is dry can be tested to see if there is water leakage, such as water leakage can be put into normal use.
