The decoration of roughstock room needs to pay special attention to the steps, according to a certain planning, the whole decoration link will be orderly, so as to efficiently complete each link of the project. So what is the simple decoration process of the blank room, Fu Wo home network for you to introduce.
Process one, clear decoration area, understand the wall size.
1, clear the area involved in the decoration process. Especially tile area, wall paint area, wallpaper area, floor area.
2, clear the main wall size. Especially after the need to design furniture wall size.
Process two, reasonable demolition, smart use of space.
Mainly including demolition wall, building wall, shovel wall skin, demolition heating, plastic steel Windows and so on. The garbage after demolition and modification should be cleaned out in time to ensure the cleanliness of the room, but also to facilitate construction.
Hydropower transformation, as far as possible do not regret. Brick on the wall, ceiling, and then want to add a socket can be difficult. So, be sure to determine the switch, lamps, basin, bathtub, washing machine and so on the exact location.
Before the transformation of water and electricity, cabinet designers should come to the door for the first measurement, to help you determine the transformation of the power supply and water. Water heater, it is also best to send someone to design the location of the power supply and interface according to the model you have determined.
Process three, optimize the appearance of the pipeline, strengthen the decorative effect.
Pipeline in general, sanitary ware installation is the most, sanitary ware decoration in our whole home decoration, is the most troublesome place, not only to slip, and to ensure dry, so optimize the appearance of the pipeline, not only play the role of moisture-proof, but also play the effect of decoration.
Process four, the ground material decoration (tile points).
Ground material decoration (tile points), brick before, to buy a good floor drain. After waterproofing and drawing, we are ready to put up bricks. In addition to the normal tiling attention, ceramic tile soaking water, dry; Apart from the broken tiles left for cutting, I personally emphasize the overall aesthetic feeling of brickwork.
Process five, beautify the roughcast room wall, let the wall beauty.
Wallpaper is much better than wall paint. After the wall paint is painted, the oil worker will brush the nitrocellulose paint where the wallpaper needs to be pasted. The paint will dry the next day, and then you can ask the master to paste the wallpaper. At first, we were worried that the wallpaper would be painted white wall dirty, and then when we pasted it, we knew that the wallpaper was really a very clean job! Note: Do not open the window for ventilation within 48 hours after wallpaper is pasted. Let it dry slowly. Talk to the master and ask him to help fix some warped spots.
Flow six, socket installation clever arrangement.
The socket panel can be installed in about half a day.
The above is to introduce the relevant knowledge of “Foshan roughstock room simple decoration process” for you. I hope it can be helpful to you in the “roughstock room simple decoration process”. If you want to have a further understanding of the “blank room simple decoration process” can go to the Fuwojia home network, here not only have more decoration knowledge, but also can release free bidding information, obtain budget plan, decoration price and other related information.
