In China, many family bathrooms still choose to install squat toilets. Let’s take a look at the size and installation method of the squatting pan, the brand and price of the squatting pan.
Squat toilet size and installation method
When it comes to the standard size of the squatting toilet, the size of the adult squatting toilet: 610mm in length and 270mm in width; the size of the squatting toilet in children: 480mm in length and 220mm in width, and the distance from the center of the water inlet to the finished wall should not be less than 60mm. The thickness of the green body at any part should not be less than 6mm.
In addition, other common squatting toilet sizes: the length is generally 520mm, 535mm, and 580mm. The widths are 420mm, 430mm, and 450mm respectively. So you can choose the right size according to the size of your bathroom.
installation method
1. According to the sewage outlet of the installed product, reserve the sewer pipe at an appropriate position from the wall, and at the same time determine the distance from the sewer pipe entrance to the ground level.
2. The depth of the pit reserved for installation of the squatting toilet under the ground is greater than the height of the toilet.
3. Put the connecting rubber plug into the water inlet hole of the squatting pan and tighten it. Apply a layer of glass glue or putty on the outer edge that is in contact with the water inlet hole of the squatting pan, and insert the water inlet pipe into the water inlet hole of the rubber plug to make it well sealed with the rubber plug to prevent water leakage
4. Apply a layer of glass glue or putty on the edge of the water outlet of the squatting toilet, put it into the entrance of the sewer pipe and screw it together, and use coke slag or other fillers to erect the toilet horizontally.
5. Open the water inlet system and check whether there is water leakage at each joint. If there is water leakage, check the condition of each joint. until the problem is resolved.
