Can the iron pot be used in the induction cooker? 2020-12-22 The iron pot can be used in the induction cooker. Because the main component of the iron pot is iron, iron can be magnetic conductivity, so the iron pot can be used on the induction cooker. Induction cooker can put cast iron pot, raw iron pot, stainless iron pot, as long as it is flat, stainless steel pot can also be. But generally use cast iron pot, and should be thicker, or a heat deformation.
An iron pot can be used in an induction cooker. Because the main component of the iron pot is iron, iron can be magnetic conductivity, so the iron pot can be used on the induction cooker. Induction cooker can put cast iron pot, raw iron pot, stainless iron pot, as long as it is flat, stainless steel pot can also be. But generally use cast iron pot, and should be thicker, or a heat deformation.
The ideal special cooker for induction cooker is based on iron and steel products. Because this kind of ferromagnetic material can match the heating load with the induced eddy current during the heating process, the energy conversion rate is high and the magnetic field leakage is relatively small.
Notes for use of induction cooker:
1, induction furnace due to the large power, in the configuration of the power line, should choose to withstand 15A current copper core wire, supporting the use of sockets, plugs, switches, etc., also to achieve this requirement. Otherwise, the large current when the induction cooker works will make the wire, socket and so on heat or burn.
In addition, if possible, it is best to install a safety box in the outlet of the power cord for safety.
2. The table top of the induction cooker should be flat, especially when eating hot pot at the table. If the tabletop is uneven, so that a foot of the induction cooker is suspended in the air, the gravity of the pot will force the furnace body forced deformation or even damage.
In addition, such as the tabletop tilt, when the induction cooker heating pot, pot generated by the micro shock is also easy to make the pot slide out and dangerous.
3, the working induction cooker with the heating pot and heating up.
So. When the induction cooker is placed in the kitchen, it should be ensured that there is no object blocking the inlet and outlet of the furnace body. The side of the furnace body, below do not pad (pile) put the object that may damage the induction cooker, liquid.
Need to prompt is, when the induction cooker in the work such as its built-in fan does not turn, to stop immediately, and timely maintenance.
Read the full article
