The maintenance of the suspended ceiling is very important, because the kitchen has a lot of oily fume, and the bathroom is a humid place. If you don’t pay attention to maintenance, it will easily lead to different degrees of damage to the suspended ceiling. Only pay attention to the timely cleaning and maintenance of the integrated ceiling. In this way, the service life of the integrated ceiling can be extended and its greater value can be exerted.
[Tip 1]
Under normal circumstances, our integrated ceilings are installed in kitchens and bathrooms. If cleaning, this should be solved separately. Let’s talk about the kitchen first. Usually, the gussets in the kitchen are mostly brushed or nano-roller coated. There are also very few customers who use laminated boards to save money. The oil resistance of the brushed boards and nano-boards is very good. You only need to wipe it with a soft cloth, but because it is in the kitchen, it will be somewhat oily. If it has not been cleaned for a long time, then it needs to be cleaned deeply. Use a small amount of detergent, but there must be sufficient To mix it with water, use a softer, more absorbent cloth to soak it in water and then scrub it. It doesn’t matter if you use a little force in the middle, but when it’s on the periphery, use light force.
【Tip 2】
Special attention should be paid not to scrub with hard objects and cleaning balls, as soon as you wipe, some small scratches will be left on the bright panel, which will damage the gusset. At this time, if it is brushed or nano roller It’s okay to paint, it’s not so good if it’s laminated. After the film-coated board is applied in the kitchen, it should be deeply cleaned once a month. Brushed boards and nano-roller coated boards are OK once every six months to one year. Deep cleaning should be carried out in two times. The first time is to scrub with a soft towel soaked in water, and the second time to scrub with clean water. Open the window to ventilate and dry naturally.
【Tip 3】
If the ventilation and sunlight are not good, you can use a better quality paper towel once. Another point, if you use the kind of heavy and cheap aluminum plate, you have to be careful, because there are a lot of iron in it, it is not an aluminum-magnesium alloy gusset, so it is easier to Rusty. Generally speaking, there is no oil stain on the gusset of the bathroom, so it is easy to take care of and clean it. It is OK to scrub it with a soft cloth and water frequently. It is enough to use the kitchen cleaning method to do a deep cleaning once a year. It is better to clean and take care of the bad boards that need to be explained here. Usually, it is enough to remove the dust with a soft cloth, because the more you clean, the faster the rust will come out. Good boards are fine for more than ten years, but cheap iron-containing gussets only have a chance of three years. After three years, they will start to rot and rust from the edges, and eventually the whole thing will be rotten. It will be ugly, and then you will regret it. A wrong choice made for the sake of being cheaper by ten or twenty yuan.
