Wave wheel and drum washing machine is a common washing machine products on the market, but many people in the face of these two types of products at the moment most people will feel unable to start. Because there are too many products, most of the salespeople are telling you that the product promotion price is very low, and it is very valuable to start now, but there is not much analysis of where the user is used and who is used as usual.
Roller washing machine or wave washing machine, which is better?
From the principle of both things:
The drum washing machine is named after the horizontal shaft drum structure, and its principle is: the water is frequently sprayed by the water pump, and the rotating drum and lifting bar mobilize the clothes to flip up and down, forming a beating and rubbing to achieve the effect of removing stains.
The wave wheel structure at the bottom of the inner barrel of the washing machine is named after it. The working principle is: the rotating inner bucket and the wave wheel stir the water, and wash the clothes to reach the purpose of stain removal.
From the laundry time:
Cylinder washing time is: 1 ~ 2 hours
The washing time of the wave wheel is: about 40 minutes
If you want to have a shorter laundry time, it is recommended to buy a wave washing machine, and after the start of the wave wheel can continue to add clothes in, although now some rollers can also, but still not common.
From the point of view of saving water and electricity:
The power of the drum washing machine is usually about 200 watts, if the water temperature is 60 degrees Celsius, it takes more than 100 minutes to wash clothes once, and the power consumption is about 0.4 degrees.
The power of the washing machine is usually about 400 watts, and it takes up to 40 minutes to wash clothes once, less than 0.3 KWH of electricity. However, in terms of water consumption, the drum washing machine is about 40% to 50% of the wave washing machine.
From the wear of clothing:
The drum washing machine simulates hand rubbing, the cleaning degree is average, the wear rate is low, the clothes are not easy to wrap.
The washing degree of the washing machine is 10% higher than that of the drum washing machine, and the natural wear rate is 10% higher than that of the drum washing machine.
From the perspective of cleanliness:
The advantage of the wave washing machine is to wash the clothes clean, but it will also cause damage to the clothes. Some expensive clothes are washed in the wave washing machine, which is naturally not suitable. If the clothes you buy are precious and you want to minimize the damage to the clothes during the laundry, then you can consider buying a drum washing machine.
The wave wheel and the roller have their own advantages, and the choice of which should be based on their own wishes to decide. Of course, if I had to choose again, I would still choose the drum washing machine. In general, the applicability of the wave washing machine is better, if you have a limited budget, then the wave is a good choice, if you do not have economic pressure, you can think of high-end drum washing machine.
Washing machine slot cleaning method steps
Wheel type automatic washing machine
1. Pour the detergent directly into the washing machine tube (after opening the plastic bag, please use it all at once)
2. Add clean water (room temperature) to high water level (when dirt is serious, use 40℃ warm water, the effect is better)
3. Run the washing machine for about 5 minutes to enrich the detergent
4. Turn off the power and soak for 1 hour (for the first time or when the dirt is serious, it is recommended to soak for 2-3 hours)
5. Wash 1 times according to the usual washing scale pattern of washing machine (washing – rinsing – dehydration)
Note: After washing, clean the inner tube of the washing machine with a towel. If there are residual debris on the wall of the tube, it is a normal sign
Drum type automatic washing machine
1. Pour the detergent directly into the washing machine tube (After the plastic bag is opened, please use it all at once. Do not pour this product into the powder container)
2. Close the side door of the washing machine, skip the pre-washing setting, and directly select the main washing program. After adding water, run for about 5 minutes to enrich the detergent and melt (when the dirt is serious, you can use 40℃ warm water for better effect)
4. Turn off the power and soak for 1 hour (for the first time or when the dirt is serious, it is recommended to soak for 2-3 hours)
5. Wash the washing machine once according to the usual washing scale pattern (washing – rinsing – dehydration). It is recommended to clean the washing machine tank regularly at least every 2 months
Increase the frequency of cleaning appropriately when the season is changing or washing is frequent
