Use a multi-purpose decontamination cream
Ceramic tile is often stained by grease, rust, soap and dirt, especially the joint of ceramic tile is easier to hide dirt and dirt. In order to keep the porcelain surface clean without damaging the brightness of the porcelain surface, you can use a multi-effect decontamination cream to clean. Ceramic tile crack, should first use a toothbrush dipped in a little decontamination paste to remove dirt, and then brush a waterproof agent at the crack, so that not only can prevent water seepage and can prevent mold growth.
Tiling over old tiles
Old tiles to refurbish, as usual requires the tile all shovel, labor intensity is very great. If you want to stick new tiles on the old tiles, cement mortar is difficult to do, at this time must use resin stone binder, it is not afraid of greasy tiles, stains, and has better bonding strength.
The same as the ordinary recuperation of light ceramic tile also needs to master some small skills, when washing, you can choose water and dishwashing detergent or soap; When washing with soap, add a little ammonia and turpentine inclusions, which can make the ceramic tile more smooth. If there is tea or other common supplies attached to the tile, it should be scrubbed and cleaned in real time, and the response cleaning supplies should be used when necessary. If there is a scratch on the brick surface, you can apply toothpaste on the scratch, which can be repaired by wiping with cloth. Brick and brick crack can not be used regularly to remove dirt with decontamination paste, and then brush a layer of waterproof agent in the crack can prevent mold growth.
Vitrified brick outside antifouling is the key
The only defect of vitrified brick is that after grinding, hair pores are exposed, and oil, dust and so on are easy to penetrate. According to industry insiders, this is a recognized problem in the industry, but some manufacturers have solved the problem through research and new techniques. Many brand products can not be passed through antifouling disposal products factory sales, consumers do not understand the situation, pavement use do not care, will occur stained situation. Consumers should ask clearly when purchasing. The vitrified brick without anti-pollution treatment should be waxed in use, and the same ordinary floor wax can be used. Before paving, in order to prevent damage to the brick surface during construction, the application of woven bags and other items not easy to decolorize the brick surface is covered well.
When cleaning and recuperating vitrefied bricks, all stains on the floor tiles should be thoroughly cleaned first. If there is glue or sticky dirt, neutral detergent and cleaning cloth can be used to wipe off. Pour the floor detergent (according to the instructions) on the floor tile, and use a waxing machine to rub the stain off the floor tile. Then pour the water-based wax onto a clean dry mop and evenly apply the wax to the floor tile. After waxing, let the outside of the floor tile dry itself, and then you can step on it. You can also use the electric fan to assist you to dry it. As usual, it will not dry completely until 8 hours after waxing.
After waxing many times the floor tile outside yellow and to wax again, it is necessary to use wax removal agent disposal. The detailed way is: the wax removal agent is used directly, without adding water, the average splash on the place to remove wax, about 10-15 minutes, the wax removal agent into the floor tile, water will be wet floor tile, wax needs to be completely removed, otherwise the wax will not shine. After cleaning the wax, please follow the above steps to clean and recuperate.
