First, Eagle bathroom faucet installation method
1. First, prepare the installation tools. Including hoses, rubber washers, shower heads, water removal, kidnappers, decorative hats, etc., each time before installation must check whether the supporting parts are complete.
2, the installation of the faucet must first connect the hose. Connect the hose to the faucet. First, choose to insert the hose into the faucet mouth, tighten it by hand, and then try to pull it to see if it is firm, and then fix the other accessories to the faucet.
3, after installing the hose, you can proceed to the next step. Fix the faucet. Secondly, the hose should be installed through the basin, fixed with accessories, and then try to see whether the faucet and the basin are closely connected, no loose, and then tighten with screws.
4. Next is the final step. Connect the water intake. Finally, place the basin in the specified position and connect the other end of the hose to the inlet pipe interface. But in the takeover, to divide the hot and cold water, remember the left is the hot water, the right is the cold water. The faucet installation is complete.
There are many kinds of taps, and different functional installation methods are also different:
1, shower, bathtub faucet (wall hanging) installation
This type of faucet is usually installed with electrical appliances. When you buy a shower, bathtub, wall faucet, you can choose the appropriate height to bury the water pipe. The distance between hot and cold water pipes must be 15 cm. Before installation, you must not forget to flush the water pipe, so as not to have strong water quality and cause damage to the faucet.
2, hidden shower, bathtub faucet
The installation of this type of faucet requires a wall. After purchasing a hidden faucet, it is generally necessary to bury the spool of the faucet in the wall. Be sure to pay attention to the thickness of the bathroom wall before embedding. If the wall is too thin, the valve core will not be embedded. The plastic protective cover of the spool should not be removed easily during embedment to avoid damage to the spool by cement and other chores during embedment. In addition, when embedding the spool, we should also pay attention to the direction of the spool up and down, left and right, so as to avoid the spool being buried wrong. When the wall faucet is embedded in the water inlet pipe, the size is deviated, and the position can be calibrated with an adjustable inflection.
3. Installation of thermostatic faucet
Special for hot water faucet, before installing constant temperature faucet, please check whether the water pipe is hot and cold, remember not to connect the hot and cold water pipe wrong, so as to avoid the faucet can not work normally. Gas and solar water heaters cannot use thermostatic taps because the water pressure is too low. Please do not forget to install hot and cold water filters.
Second, Eagle bathroom faucet how to maintain
Faucets are often used and must be well maintained to be more durable:
1, to maintain the hose. For faucet maintenance, the hose needs to pay special attention to the use of habits, and some households will wind the hose of the faucet on the faucet, which will cause the hose to break or damage.
2, don’t be too violent to the dragon. Faucet maintenance needs to maintain good habits when in use, do not use too much force when opening and closing the faucet, only need to turn along the trend, too much force will destroy the sealing valve of the faucet, resulting in lax faucet and water leakage.
3. Keep the faucet dry often. Ensure integrity as new, to avoid rust, usually after use to wipe the faucet surface clean; Then the faucet is generally more prominent, so be careful not to bump or press it when taking the item. .
3. Check the faucet frequently. Tap water flow becomes smaller to clean up impurities in time. In the case of water pressure of not less than 0.02mpa, if the water output is found to be reduced, it may be blocked inside the faucet. The solution is to use a wrench to gently twist the nozzle screen cover at the water outlet of the faucet, and then carefully install the impurities after cleaning, and generally can be restored as before.
Eagle bathroom faucet design is reasonable, it is still very convenient to use. After reading the installation method of the eagle bathroom faucet introduced in the small compilation and how to maintain the eagle bathroom faucet, have you learned it? In fact, it is not difficult to install yourself, and the decoration can also be completed. If you have not learned, it does not matter, you can ask a special construction worker to install.
