Our daily life is inseparable from the toilet. When doing home decoration, in addition to knowing the style and quality of the toilet, we should also be clear about the installation of the toilet, because it also determines how to install the toilet? What are the attentions to the toilet installation? What? Next, the editor will tell you. How to install the toilet?
1. Check the sewage pipes and ground leveling
Before installing the toilet, you should conduct a comprehensive inspection of the sewage pipes to see if there are mud, sand, waste paper and other sundries in the pipes. At the same time, check whether the ground at the toilet installation site is level. Leveling.
2. Determine the center of the sewage pipe
Turn the toilet over, center it on the toilet drain, and draw a cross centerline, which should extend to the bottom of the toilet around the feet.
3. Fixed toilet
Align the crosshairs on the toilet with the sewage outlet on the ground, install the toilet horizontally, press the sealing ring firmly, and install the anchor screws and decorative caps.
4. Bottom seal
Finally, the bottom seal should be done well, and a special sealing ring should be installed on the toilet sewage outlet, or a circle of glass glue putty) or cement mortar should be placed around it, and the ratio of cement to sand is 1:3.
5. Water tank accessories
Run the water for 3-5 minutes to flush the pipeline to ensure the cleanliness of the water pipe, then install the angle valve and connecting hose, connect the hose to the water inlet valve of the installed water tank accessories and press the water source.
Precautions for toilet installation:
1. Before installing the toilet, you should first conduct a comprehensive inspection of the sewage pipes to see if there are mud, sand, waste paper and other sundries in the pipes. The ground should be leveled. Saw the drain port short, and make the drain port 2mm-5mm above the ground as much as possible if conditions permit.
2. When choosing a toilet, you should first determine the size of the toilet, that is, the distance between the drain and the wall. Usually, the standard distance is only 300 and 400 mm.
3. Then choose the style you like according to the size, pay attention to choose the water-saving type (3-6 liters), and order to see the model and origin. The current products are mixed, so it is very necessary to shop around.
4. Before installing the toilet, you should also determine whether the selected product accessories and instructions are complete. Read the instructions carefully to understand some product matters, and avoid cheating and cutting corners. This must be paid attention to.
5. The drain outlet requires the installer to handle it smoothly, apply glass glue to match the drain outlet evenly, whether the gap between the toilet and the wall is even, and whether the placement is correct and stable.
6. After the toilet is in place, it is required that there is no water leakage, the water level is correct, the flushing is smooth, the switch is flexible, and the cover is firm.
7. Now the toilet is generally not installed with anchor screws, but the reserved hole on the toilet should be blocked with glass glue to prevent odor.
