When you install the faucet and use it for a period of time, you will find that the surface of the faucet is prone to water stains. After the water stains dry, it will form very ugly spots. If it is not cleaned for a period of time, no matter how high-end the faucet is, it will become dull. Discoloration, so we must clean and maintain the faucet frequently. Let me share with you the maintenance and cleaning skills of the faucet.
Faucet Maintenance Tips
1. The surface of the faucet should be wiped gently with a soft cloth (without impurities) dipped in detergent. Do not use wire balls or scouring pads with hard particles. In addition, do not collide with hard objects so as to scratch the surface of the faucet.
2. Remove rough mask and buildup with the following cleaners: Mild Liquid Glass Cleaner, Pure Liquid Glass Cleaner, Acid Free, Non-Abrasive Mild Liquid or Fully Dissolving Powder, Non-Abrasive Solution Polish.
3. Do not use any abrasive cleaners, cloth or paper cloth; do not use any acid-containing cleaners, polishing abrasives or harsh cleaners.
4. When the water pressure is not lower than 0.02mpa (that is, 0.2kgf/cm2), after using for a period of time, if you find that the water output decreases, or even the water heater turns off, you can lighten it at the water outlet of the faucet. Gently unscrew the screen cover, remove impurities, and generally restore it to its original state.
Let’s take a look at the cleaning method of the faucet.
1. Simple cleaning techniques for faucets
Faucet cleaning is actually not complicated, as long as it is maintained regularly, it can keep the faucet looking like new for a long time.
1. If it is a copper faucet, if you want to clean the electroplated surface, you can use boiling water and detergent to scrub it, or you can directly use some strong degreasing and decontaminating detergents for cleaning.
2. For scale, rust, etc. on the faucet, just use a damp cloth or sponge dipped in a little special detergent to wipe the surface, then dry it with a clean rag or rinse it with water.
3. Use a soft-bristled toothbrush dipped in toothpaste or wipe gently with a scouring pad dipped in toothpaste to remove scale and oil stains and make the surface of the faucet clean and bright.
4. Many people only pay attention to the surface of the faucet when cleaning the faucet, but in fact the inside of the faucet is more important. If the water output from the faucet is reduced or the water is forked, it may be caused by a clogged bubbler. The bubbler can be removed, soaked in vinegar, cleaned of debris with a small brush or other tools, and then reinstalled.
2. Precautions for cleaning the faucet
Although the chrome plating of the faucet claims to be corrosion-resistant and rust-resistant, improper cleaning methods will still cause abnormal wear and tear on the faucet.
1. Do not wipe the surface of the faucet with hard objects such as steel wool, because the steel wool is very hard and it is easy to scratch the surface of the faucet.
2. It is best to use a neutral detergent for cleaning. Strong acid-base detergents are not suitable for cleaning with a tap www.(92TO.com).
3. After the faucet is cleaned, the remaining water on the surface should be wiped dry with a dry lint-free towel to avoid residual water stains.
The introduction to the maintenance and cleaning skills of the faucet is here today. I hope the above content will be helpful to everyone!
