When you install the faucet and use it for a period of time, you will find that the surface of the faucet is prone to water stains. After the water stains dry, it will form very ugly spots. If it is not cleaned for a period of time, even if the faucet is high-end, it will become dull. Discoloration, so we must often clean and maintain the faucet. So, how can we maintain the faucet reasonably and effectively, here are some tips for you to see how it works.
1. Simple cleaning techniques for faucets
Faucet cleaning is actually not complicated, as long as it is maintained regularly, it can keep the faucet looking like new for a long time.
1. If it is a copper faucet, if you want to clean the electroplated surface, you can use boiling water and detergent to scrub it, or you can directly use some strong degreasing and decontaminating detergents for cleaning.
2. For scale, rust, etc. on the faucet, just use a damp cloth or sponge dipped in a little special detergent to wipe the surface, then dry it with a clean rag or rinse it with water.
3. Use a soft-bristled toothbrush dipped in toothpaste or wipe gently with a scouring pad dipped in toothpaste to remove scale and oil stains and make the surface of the faucet clean and bright.
4. Many people only pay attention to the surface of the faucet when cleaning the faucet, but in fact the inside of the faucet is more important. If the water output from the faucet is reduced or the water is forked, it may be caused by a clogged bubbler. The bubbler can be removed, soaked in vinegar, cleaned of debris with a small brush or other tools, and then reinstalled.
2. Precautions for cleaning the faucet
Although the chrome plating of the faucet claims to be corrosion-resistant and rust-resistant, improper cleaning methods will still cause abnormal wear and tear on the faucet.
1. Do not wipe the surface of the faucet with hard objects such as steel wool, because the steel wool is very hard and it is easy to scratch the surface of the faucet.
2. It is best to use a neutral detergent for cleaning, and a strong acid-base detergent is not suitable for cleaning with a tap.
3. After the faucet is cleaned, the remaining water on the surface should be wiped dry with a dry lint-free towel to avoid residual water stains.
Three, faucet use and maintenance skills
1. Do not use too much force to switch the faucet, just turn it gently. Even if it is a traditional faucet, it doesn’t take a lot of force to screw it down. In particular, do not support or use the handle as an armrest.
2. The metal hose of the shower head of the bathtub faucet should be kept in a natural stretch state, and it should not be coiled on the faucet when not in use. At the same time, when in use or not in use, be careful not to form a dead angle at the joint between the hose and the valve body, so as not to break or damage the hose.
3. When the water pressure is not lower than 0.02mpa (that is, 0.2kgf/cm2), after using for a period of time, if you find that the water output decreases, or even the water heater turns off, you can lighten it at the water outlet of the faucet. Gently unscrew the screen cover, remove impurities, and generally restore it to its original state.
4. Experienced and qualified professionals should be invited for construction and installation. When installing, the faucet should try not to collide with hard objects, and do not leave cement, glue, etc. on the surface, so as not to damage the gloss of the surface coating. Pay attention to remove the debris in the pipe before installing the faucet.
Induction faucet maintenance method
The induction faucet is a kind of faucet. Although it is small in size, it plays an important role in public places with dense traffic and home life. How to properly use and maintain a faucet after buying it home is a headache for many consumers. In the process of using the faucet, always have frequent intimate contact with the small faucet. So how do we maintain the faucet under such a high frequency of use? How can we make the faucet last longer?
In fact, as long as the installation, use, and maintenance are correct, the actual service life of the faucet can be greatly extended, and it will always be as bright as new.
1. Do not wipe the surface of the faucet directly with a wet towel;
2. Do not wipe the faucet with burrs;
3. Do not let the faucet touch the acid-base liquid;
4. Don’t put the faucet directly on the hard object (especially when showing it to customers, don’t put it directly on the desk, so that customers can feel that your product is not high-end);
5. Wipe with a dry soft cotton cloth.
Also, be aware of:
1. Usually, you can spray car wax on the surface of the faucet for 3-5 minutes and then wipe it to keep the brightness of the faucet sample;
2. It is best not to touch it directly with your hands at ordinary times, because the oil on your hands is easy to get on the surface of the faucet, which is not easy to clean and affects the smoothness.
