Hello everyone, I’m Xiaolei. Today I’m here to talk to you about the problem of hollow tiles falling off, especially the wall tiles that use floor tiles on the wall. Today I will mainly talk about how to prevent the hollow tiles from falling off.
It was really rare to encounter empty drums falling off in the past few years, but in the current market environment, the situation of hollow drums falling off is really everywhere. You can also see it in online videos. Really This happened to many friends, and they also fell into the pit during the process of avoiding the pit. The more cautious the more precautions, the tiles still have problems one by one in the end. These problems are mainly concentrated on the floor tiles and walls. The reason for these problems is that the quality of ceramic tiles is getting better and better, and the water absorption rate is getting lower and lower. The density and firmness are getting better and better, but when the quality of tiles is getting better and better, workers The craftsmanship has not improved, and the craftsmanship is still in the original sand ash stage, and you can also see it in online videos, and a large part of bricklayers are still using sand ash plus adhesive to lay floor tiles. wall.
The choice of sand and ash paving is not only the reason of the master, but also a big part of the reason is to save costs. Whether it is a decoration company or an individual owner, they want good results and do not want to spend too much cost, so this It is also the cause of the tile hollowing and falling off. Next, I will tell you the most correct way to lay floor tiles on the wall. The first method is dry hanging. This is the same as the marble paving on the outer wall. It also uses a metal skeleton, and then uses marble for the tiles. Glue to dry hang it on the steel frame. This is the dry hanging type, but it is obviously not suitable for our residential houses. First, it takes up a lot of space. Second, it has a large interior. There will be some cockroaches and insects living in the gap after a long time, which is obviously not suitable for family use.
The second is to use a special adhesive, which is the most commonly heard, that is, tile adhesive. It is not allowed to use sand ash to directly lay the mat. You can take a look at the outer packaging of the tiles. There are recommended paving methods, and there are also paving methods that are not allowed. There are only two ways to use floor tiles on the wall. The first is dry hanging, and the second is to use tile adhesive. If the wall is not smooth, the operation method is also different. First, if the sand-ash layer on the wall is loose, it is recommended that you must brush a layer of wall to stabilize the base. The second step is that if the wall is relatively flat, directly To make the waterproof layer, if it is uneven, first do sand and ash leveling treatment, and then do the waterproof layer treatment.
The third step is to do roughening on the waterproof layer. This roughening can be done with mortar or tile adhesive. In fact, it is a lot of small cones one by one. The contact area is expanded to enhance the adhesion.
The fourth step is to use tile adhesive directly for leveling and bonding. The fifth step is to brush the tile adhesive on the back of the tile. The adhesive is liquid and the tile adhesive is powder, which needs to be mixed with water. Remember that the tile adhesive and tile back adhesive must be mainstream in the market, and they need to be of the same brand to be used together. The outermost layer is the tile. The above is a correct way to lay the floor tiles on the wall.
You must not save the cost of auxiliary materials for large-area floor tiles on the wall. We have learned from the past. There is no big problem with a small amount of hollowing on the tiles. The only big problem is that it may fall off during the hollowing process. If a large piece of tile falls off and people walk under it, one can imagine the consequences. During the decoration process, part of the money can be saved, and part of it can’t be saved.
Well, that’s all for today’s article, I hope it can be helpful to everyone, see you next time.
