HOMENews

Flying plume electric faucet price is how many flying plume electric faucet troubleshooting

Flying plume electric faucet price is how many flying plume electric faucet troubleshooting

2023-01-04 08:01:48

Feiyu Electric is at the leading level in China, with an annual production capacity of 3 million electric heating faucets and 500,000 electric water heaters. Its flagship product – Feiyu electric heating faucets has always maintained the leading production and sales volume in the domestic industry.

Price of Feiyu electric faucet

1. Feather KDR-8D(13)A

Reference price: ¥1080

Applicable water pressure: 0.07-0.5

Rated power: 3

Rated voltage: 220

Waterproof grade: IPX4

2. Feather KDR-17(60)

Reference price: ¥438

Applicable water pressure: 0.04-0.6MPa

Rated power: 6

Rated voltage: 220

Single product packaging size: 230×150×130mm

Waterproof level: IPX4 (splash-proof level)

After-sales service of Feiyu electric faucet

After-sales telephone of Feiyu electric faucet: 400-606-7688

Feiyu electric hot water faucet failure

Fault causes and countermeasures of Feiyu electric faucet: 1. The pull rod of the basin faucet automatically slides down after being lifted. The cause of the fault: the washer of the pull rod connecting rod is not installed or the nut is not tightened. Countermeasures: install the pull rod connecting rod washer or tighten the nut. 2. The water outlet of the electric hot water faucet is incorrect or the water volume is reduced. The cause of the failure: the filter of the rectifier is fouled or blocked by debris. Countermeasures: put down the bubbler of the rectifier and clean the filter. 3. Basin faucets and cabinet faucets have small water output and no air bubbles. Cause of failure: low water pressure. Countermeasure: Unscrew the faucet and replace the bubbler.

Feiyu electric hot water faucet manual

Feiyu electric faucet manual installation method

Flying Feather Second Heat Emperor Crown Series KDR-8D-32/34A installation method:

1. This model is suitable for users whose water outlet is above the pool. It is easy to install and comfortable to use.

2. Before installation, please remove the original faucet or other pipe fittings at the installation position, use iron wire or similar objects to insert into the interface to stir inside the pipe, then slowly open the water valve to completely discharge the dirt in the pipe, and close it after the outlet water becomes clear.

3. Pass the wire end of the connecting piece through the inner side of the fixing nut, and wrap more than 15 turns of raw material tape on the wire mouth. Then screw it to the interface until it is tight, and keep the raised card points on the connector horizontally left and right, and vertically up and down.

4. After aligning the card slot in the water inlet of the host with the card point, tighten the fixing nut counterclockwise.

Internal structure of Feiyu electric faucet

The internal structure of Feiyu electric faucet includes:

1. Water-inlet anti-electricity wall and water-exit anti-electricity wall: water is safer and more reliable.

2. Zero cover: In the case of failure of the ground wire, it can also ensure that the outlet water voltage is zero, and there are many barriers for safety.

3. Zero line column, electric heating column, and live line column: strongly guide the remaining induced current of the machine into the ground to effectively prevent leakage.

4. Water pressure switch: it can well disperse the water flow and avoid hot water flow.

5. Indicator light: The blue indicator light is on when heating, and the working status is clear at a glance.

In addition, its accessories include: host, elbow, warranty card, product manual, plug, certificate of conformity, threading ring, base gasket, and fixing screws, etc.