Everyone has a faucet in their home, and the biggest function of the faucet is to control the in and out of the water source. But now a kind of electric hot water faucet is popularized on the market. It can be understood from the literal meaning that this kind of faucet is a faucet that can turn cold water into hot water by heating with electricity. Save about 30% power than water heaters. This kind of electric faucet is mainly because there is a heating tube in the heating lumen, and the power of the heating tube is very small, generally only 2-3kw, so it saves energy. Although this kind of electric heating faucet is also protected by an insulating device, it will not leak electricity and will not fail frequently, so what should you do if the electric heating faucet fails? The editor will teach you a few good ways to easily solve the fault of Feiyu electric heating faucet.
Reasons and countermeasures for the failure of Feiyu electric faucet:
1. The pull rod of the basin faucet automatically slides down after being lifted. The cause of the failure: the washer of the connecting rod of the pull rod is not installed or the nut is not tightened. The countermeasure: install the washer of the connecting rod of the pull rod or tighten the nut.
2. The water outlet of the electric hot water faucet is incorrect or the water volume is reduced. The cause of the failure: the filter of the rectifier is fouled or blocked by debris. Countermeasures: put down the bubbler of the rectifier and clean the filter. 3. Basin faucets and cabinet faucets have small water output and no air bubbles. Cause of failure: low water pressure. Countermeasure: unscrew the faucet and replace the bubbler.
4. Leakage of the mandrel: Cause of failure: The water stop skin or water stop ring of the mandrel is damaged. Countermeasure: Replace the water stop skin or water stop ring. In areas with poor water quality, a filter screen should be added to the water inlet of the faucet. 5. When the faucet is closed, there is noise in the body or piping. The cause of the failure: (1) Countermeasures for excessive water pressure: reduce the water supply pressure (turn down the triangular valve or water stop elbow); (2) Rapid closing countermeasures: avoid rapid closing of the faucet ;(3) Poor fixing of piping, countermeasure: re-construction. 6. Water leaks at the connection between the hose and the faucet. The cause of the failure: improper installation, rubber ring, deformation countermeasures: replace the rubber ring and reinstall.
7. When the hot water comes out, the hand will feel numb when touching the hot water. The cause of the failure: the ground wire is not connected properly. Countermeasure: normal wiring. 8. When the handle is turned to the closed position, water will still come out or the water cannot be closed. The cause of the failure: generally the water temperature is too high, and the main shell is cracked. Countermeasure: replace the shell.
Because the electric hot water faucet has the advantages of fast hot water, energy saving and environmental protection, and convenient use, this new type of small technological household appliance has entered thousands of households, and has also been recognized and used by consumers. However, no matter what kind of electric faucet you choose, you should pay attention to safety when using it. When cleaning, do not directly wipe the surface of the electric faucet with a wet towel, let alone directly touch the surface of the electric faucet with your hands. In order to maintain the surface finish and aesthetics of the electric faucet. When you encounter a faucet failure, you should keep calm and apply the solutions to the failure of the Feiyu electric heating faucet compiled by the editor to solve the problem correctly.
