Folding door selection skills
1, the name and color.
The purpose of renovating the house is to create a warm and harmonious living environment, so the first thing to consider when choosing a small folding door is the name and color with the harmony of the atmosphere of the living room. The decorative concept of smooth and simple to choose a generous and refined name; active and bright to choose light and elegant want to match; classical leisure is decorated with heavy elegance, in short, it is recommended to choose the atmosphere of knowledge class near.
2, the choice of color system.
A good color match is the key element to dye the room, so after determining the name of the next thing to consider is the color of the small folding doors and room color match. Room color scheme is basically similar to the chromaticity of the main attached to the point of contrast factors, you can first room color image and darkness of the environment to hold a division, can be three major color system; wall, ground, furniture soft decoration. Basically keep the three major color system can be, not benefit too much. Interior door color can be considered close to the furniture color system, such as the ground is a dark floor wall white with purple Weiwei wood doors. The general environment color system both contrast and maintain harmony. If you do not have too much control or not in the case of professional guidance, recommended this “lean” facility, do not always think about the comparison around, the reality of the environment has been contrasted, you just need to find a door color close to the environment can be, or the ground or wall or furniture, and then in the details of the difference can be, such as The texture of the wooden door and the ground wood grain to hold a difference with. As for relying on which color system to prove the existing truth open weighing.
3, touch feel.
After the name color thoughtful, then the product is the process and quality issues. We are unlikely to go to the manufacturer to stare at how he is processed, only through the simple appearance of the grinding means to assess the quality of the product process. Here to teach everyone two words: hand touch and side light look. Stroke the door’s frame, panel, corner with your hand, no scratch feeling, soft and delicate, and then stand on the side of the door to see whether the paint surface of the door panel has a bumpy sea waves. Basically by these two can know whether the workmanship pass.
Folding door installation method
1, confirm whether the length of the track is accurate, such as too long sawing off the long sector. Pay attention not to let sawdust into the track.
2, confirm the handle bias and shallow lock installation bias, and then install the track. From the center to the left and right of the order screwed firmly. Untie the rope that binds the folding door after installation.
3, insert the folding door into the track in the bundled state.
4, the installation of the suction iron plate, prior to the location of the suction iron stone on the folding door right, and then tighten the suction iron plate with screws.
Folding door cleaning and conditioning
Folding door outside if there is dirt, please use neutral detergent, towels, etc. to wipe away the dirt, and then must use wet hair (partial dry) wipe test. Please do not use organic solvents, to prevent folding door outside fading. The subtleties, as much as the quality and concern, superior anti-fouling performance, more than let you never arduous, easy to take care of. Folding door series is easier to clean and take care of. Not easy to dirty, and common dirt can be easily removed with water.
