Generally, household water heaters use electricity and gas. If there is natural gas installed in the home, gas water heaters are usually used because it burns water faster, and the price of natural gas is also higher than that of electricity. It is much lower. These factors have made gas water heaters the mainstream water heaters in the home. However, in order to ensure that the gas water heater has fewer problems when it is in use, we must pay attention to the installation of the gas water heater.
Because the gas water heater uses natural gas, if the installation is not careful at all times and the natural gas leaks, the safety hazard is very large. Therefore, when installing the gas water heater, you must pay attention to comprehensive inspections, and the installation must be qualified. yes. The detailed gas water heater installation process is as follows:
1. After the gas valve is installed, the master will measure it first, and then drill holes on the wall according to the measured data. The water storage water heater must be installed on the load-bearing wall, otherwise there will be safety hazards. If it must be installed on a light-weight wall, it must be installed with brackets or other measures.
2. The next step is to start work. It is also skillful to drill holes on the tiles. First, use a fine drill to grind a small hole to fix the drilling position, then use a thick drill to slowly grind the tiles thoroughly, and then use the hammer to drill. Drill holes deep so that the general tiles will not crack.
3. Once the drill is done and the screws are secure, the next step is to hang up the gas water heater. While hanging, it is necessary to ensure that the water heater is firm and cannot be loosened. The installation height is generally 165-175 cm, whichever is parallel to the line of sight of the fire viewing window.
Pay attention to:
1. The name Siyi gas water heater uses gas as the energy source, so it has certain safety hazards. When installing, you must pay attention to sealing the gaps between the exhaust pipes and ventilation during use (the installation location should also be ventilated).
2. Adjacent to the receiving material: there is a leather pad in the water pipe, which is used to drain water, and it must be paid attention to during installation. The gas connection should also pay attention to the sealing problem, so as to avoid potential safety hazards. When buying pipes by yourself, you should pay attention to choosing better materials. Manufacturers choose brand-name pipes, so the price is also high.
3. Tools: drill bit (requires a certain strength), screwdriver, wrench, expansion screw, sealing strip.
The above is the installation steps of the gas water heater and the matters needing attention. If you are worried about the mistakes in your installation, it is recommended that you contact the manufacturer and let the manufacturer send someone to install it for you, and in the process of using the gas water heater , Be sure to regularly troubleshoot the water heater to avoid potential safety hazards.
