With the development of science and technology, people’s quality of life is getting higher and higher. It can be said that many of our commonly used tools have also changed greatly in shape, and have also improved the efficiency of the original tool. Now let’s talk about the faucet, it can be said that in the last century, the faucet is to twist the switch above the faucet, and now there is a faucet called gooseneck, but this faucet is not our usual water faucet, but with the water purifier used. You can learn about it together.
I. Product introduction
The gooseneck faucet is a non-pressure, sanitary single cooling faucet, which is used with the water purifier. Municipal raw water enters the water purifier through the tap, and the water purifier removes the virus, sterilization, odor and filtration of the raw water, so that the water quality is clean and sanitary, and is directly for drinking. The product structure is reasonable and the shape is beautiful. Selection of lead-free high quality brass, water pipes for PE plastic, to ensure no pollution. The outer surface of the product after electroplating treatment, very delicate, very solemn, luxurious, is the hotel, hotel, family preferred high-grade appliances.
2. Installation and use method:
Installation steps:
Step 1: Install the surface part:
Put the decorative ring and rubber pad (decorative ring on top, rubber pad on bottom) over the threaded pipe, move it to the bottom of the faucet, and then push the threaded pipe into the mounting hole on the countertop.
Step 2: Fix the faucet:
Thread the copper gasket over the threaded pipe from under the countertop first, and then tighten the copper nut up by hand or with a wrench until it is firmly fixed.
Step 3: Assemble the water pipe:
1. Connect the blue pipe (water inlet) to the water inlet ball valve.
2. Connect the white pipe (connected to the water purifier) to the water inlet of the water purifier.
3. Connect the red pipe (water outlet pipe) to the water outlet of the water purifier.
Step 4: Test tightness:
Open the water supply valve, open and close the control valve on the tap respectively, check whether the connection is permeated, if there is water seepage, you can lock the connector at the water seepage.
Iv. Precautions:
Do not arbitrarily disassemble the water pipe at the bottom of the faucet and the handle screw switch to avoid the hexagonal-quick connector breaking and the rubber ring and ceramic spool damage, causing the faucet to be scrapped.
Five, the working principle:
The invention relates to a gooseneck faucet positioning structure, which has a gooseneck faucet, under which an inlet pipe is provided with a quick joint to connect a water source into the pipe; A body is combined with the lower part of the gooseneck faucet, and is connected to the first level table, the flow table is provided with a perforation for the water pipe to penetrate; The inner ring of the seat is provided with a convex stop edge and a stop end, and a center hole and a positioning hole, which can be inserted into the outer side of the seat body. The bottom side of the gooseneck faucet has an inlaid edge, and screws are inserted into the positioning hole of the seat body, and then into the flow management table to locate the main body. The inlet pipe of the Gooseneck faucet is inserted into the center hole of the seat body and the perforation of the flow management table. Insert the bottom edge into the stop edge of the seat body, against the stop end, and then push the stud into the bottom surface of the gooseneck faucet through the outside of the seat, so that the Gooseneck faucet is positioned on the flow table, so that the Gooseneck faucet can be assembled directly on the flow table without the need to operate and assemble in the narrow space under the flow table. The invention relates to a gooseneck faucet positioning structure, which has a gooseneck faucet. The lower part of the gooseneck faucet comprises: an inlet water pipe, which is connected to a tooth pipe, and a water source inlet pipe is connected to a quick joint below; A body is combined with the lower part of the gooseneck faucet, and is connected to the first level table, the flow table is provided with a perforation for the water pipe to penetrate; Its characteristics are: The inner ring of the seat is provided with at least one protruding stop edge and stop end, and there is a central hole and at least a certain position hole, and a stud can be inserted into the outer side of the seat body. The bottom surface of the gooseneck faucet is provided with at least one insert edge, which is driven into the positioning hole of the seat body with a self-tapping screw, and then into the surface of the flow management table to locate the main body, and then the inlet pipe of the Gooseneck faucet is inserted into the central hole of the seat body and the perforation of the flow management table. And rotate the gooseneck faucet at an Angle so that the bottom side of the inlay is inserted into the stop edge of the seat body, against the stop end, and then the stud is inserted into the bottom side of the Gooseneck faucet from outside the seat, and the Gooseneck faucet is completely positioned on the flow counter.
Gooseneck faucet water leakage fault treatment
1. Description of the situation: The gooseneck faucet of the pure water machine cannot be turned off, and the phenomenon of slow dripping occurs.
2, judgment and analysis: This situation generally has two reasons:
1) There are impurity particles in the position of the ceramic spool and sealant pad of the faucet, which affects the sealing effect.
2) During the installation and tightening of the spool of the faucet, the top hemispherical decorative cover is not completely loosened in place, resulting in the spool not being fully fastened, resulting in water leakage.
3. Treatment method:
1) Hold the handle of the three-pronged faucet and unscrew the top cover of the three-pronged faucet in a counterclockwise direction.
2) First clean up the impurities and particles remaining inside the ceramic spool and sealant gasket, any impurities will affect the sealing effect.
3) Reinstall the installation according to the following steps and precautions.
Step 1: Insert the groove of the upper ceramic valve body into the positioning pin pointed by the arrow in the copper sleeve of the faucet.
Step 2: Place the positioning pin on the edge of the lower ceramic valve body into the slot pointed by the arrow in the copper sleeve of the faucet
Step 3: Rotate the handle of the three-prong faucet so that the upper and lower valve bodies are closed.
Step four: Insert the small end of the sealing ring into the faucet end cover.
Step 5: Screw the hemispherical decorative cover closest to the three-pronged handle.
Step 6: Rotate the reassembled spool into the valve body clockwise and tighten it completely
The above is the introduction of the Gooseneck faucet, we start from the beginning of the most basic introduction, the Gooseneck faucet is generally used with the water purifier, and the appearance is also very delicate and beautiful. It also has the function of ensuring no pollution. Then it introduces the installation method of the gooseneck faucet. If you can use it, you can install it according to the above steps. Again, we also introduced some matters that need attention when using the gooseneck faucet. Finally, it is the introduction of the working principle and the treatment of the daily gooseneck faucet leakage fault. I hope you found this helpful.
