With the improvement of the quality of life, people pay more attention to the decoration of sanitary ware. In fact, the decoration design of the bathroom can reflect a person’s taste, so today the Fu Wo home network summed up the six small details of the bathroom decoration, hope to help you create the bathroom boutique, here we have a look.
1. Construction skills of sanitary ware threshold
The threshold is the first pass of the bathroom, which plays the role of waterproofing and dividing the space in the bathroom, and also has the significance of accumulating wealth in geomantic omen. The key point of the construction design of the threshold is to pay attention to the plane on the threshold to the inside of the bathroom tilt, so that the water can smoothly slide to the floor drain inside the bathroom. Threshold construction point two is to be the same width as the door frame, and the door frame must be the same thickness as the wall, so that the size can be consistent when laying the floor tile, and it is very effective in preventing cracks.
2, bathroom floor waterproof construction skills
At present, the waterproof material used in the ground is mainly waterproof agent, laying sanitary waterproof layer to spread to the foot of the wall above 20 cm, the height of the waterproof layer can not be lower than the height of the threshold. When floor oil is reserved for pipeline, the waterproof layer should keep the reserved pipe. After the waterproof layer is done and dried, cement mortar should be used immediately to prevent the damage of the waterproof layer.
3, laying floor tile details
When laying the floor tile, pay attention to the joint thickness of the floor tile, and to align with the wall tile joint; The floor tile should have the drainage slope, if the bath is installed in the bathroom, the front wall of the bathtub must be made of brick. When pasting tile, the floor tile is best pasted to the bottom of the wall first, and then the wall brick, so as not to produce cracks.
4. Details of sanitary circuit laying
The wire joints between sanitary ware should be hung tin, and should be wrapped with waterproof tape and insulating tape successively to ensure safety and place leakage. So the wire body must be covered with flame retardant tube, switch and socket had better have moisture-proof box, or installed in the dry area.
5, bathroom wall tile details
The wall should also be moisture-proof and waterproof before pasting the brick. When pasting the brick, the wall should be smooth, and the floor tile must be connected and aligned to ensure the overall sense of the wall and the ground.
6. Details of sanitary drain construction
Generally, when the new house is handed over, the reserved hole of drainage is relatively large, which requires attention to repair the reserved hole of drainage, so that it can match the floor drain bought back. In order to prevent the entry of hair, sludge, sand and other dirt, the opening aperture of the floor drain grate should be controlled between 6-8mm.
I hope the above content can bring you substantial help, and thank you very much for your trust in me. If you want to know more about the decoration knowledge and decoration price, please pay attention to the Fu Wo home network, thank you for your support!
