Household booster pump is actually a secondary booster pump of the water pipe, if the water pressure of the home water heater is insufficient, the installation of the household booster pump can easily solve this problem, so that you can take a bath at ease, and the household booster pump can increase the water pressure and maintain the stability of the water pressure. The next is to introduce how to install the household booster pump and how to choose the household booster pump.
How to install household booster pump
1, before installing the domestic booster pump, check whether the firmware of the booster pump part is loose, and there is no foreign body blockage in the flow channel of the pump body to avoid the situation that can not be cleaned up after later installation.
2, when installing the household booster pump, pay attention to the vertical or horizontal installation, the direction of water flow needs to be consistent with the direction of the arrow displayed on the pump body, and try to install it in the position closest to the water level.
3, in order to facilitate the use and maintenance, you can add a valve in the household booster pump, so that it is more convenient to maintain in the future. In addition, pay attention to the installation of pressure gauges outside the pump outlet, so that you can see that the booster pump is used within the rated head and flow range, and can also extend the life of the booster pump.
4. When the suction liquid level is lower than the upper end of the impeller of the household booster pump or the shaft of the pump, the household booster pump should be installed with a check valve, and the outlet end is connected with a tee for water diversion. The pump should be filled with water and the screw plug should be tightened when it is used for the first time.
5, before the domestic booster pump chamber is not flooded, do not turn for a long time to avoid damaging the seal.
6. The motor coil is equipped with a safety protector. When the pump fails, it will automatically break off. After the temperature rise of the motor drops, it can automatically resume operation.
7, in order to ensure the safety of the booster pump, to choose a three-core socket with a ground wire.
How to choose home booster pump
According to different classification standards, it can be divided into centrifugal type and blade type. Centrifugal increase pump noise is low. If it is divided according to the automatic control method, the booster pump can be divided into three categories: pressure control, water level control and water flow control. If the house is too old, the water pressure is too low, the booster pump can be used, but if the water pressure is low due to the aging of the pipeline and too many right Angle elbows, the use of increased pump is limited. In addition, the purchase also need to consider the problem of head, flow, power, if you do not understand, you can ask the owner when buying, generally will not buy wrong.
