After the living room and bedroom are installed, only the bathroom is left. The decoration of the bathroom is very important. If the decoration is not good, it may deform, leak, etc., which will cause you a lot of troubles. Although many people say, it doesn’t matter, I have done a good job of waterproofing, and the materials are all waterproof and moisture-proof, but it is still far from enough. Today we will introduce you the bathroom ceiling installation skills in the home decoration guide. I believe that after reading this decoration guide, you will be able to understand how to install the bathroom ceiling.
First of all, when purchasing materials, pay attention to the aluminum gusset and the matching keel and accessories should meet the product quality requirements, it is best to buy them together to prevent model mismatch; during transportation and stacking, the gusset should be placed flat and not Under pressure, and avoid high temperature and harmful substances.
Secondly, during installation, it is necessary to ensure that the keel is installed flat. Generally speaking, the spacing deviation should be controlled within 1.5 cm. If there is a deviation in the size, it should be adjusted first and then inserted in order. Hard insertion is not allowed to prevent deformation. Bathroom ceiling materials should be made of metal, plastic and other materials, because the bathroom is a place for bathing and washing, and the moisture will be very high, and wooden materials are easy to deform, which has nothing to do with whether the waterproof is good or bad.
Finally, large lamps, exhaust fans, etc. should be fixed on the keel alone, and should not be placed directly on the aluminum gusset, otherwise the aluminum gusset will easily fall off, which poses a certain safety hazard and affects the appearance. At the same time, it is necessary to reserve the location of Yuba, etc., as well as the inspection port. In home decoration, most people don’t like to set inspection holes for the ceiling, because they think it will affect the appearance. Once the pipeline equipment in the ceiling fails, it is impossible to check what part and why it failed, let alone repair it. Therefore, for the suspended ceiling where the pipeline is laid, it is better to set the inspection hole, which can be installed in a relatively concealed and easy-to-check place, and the inspection hole should be artistically processed.
