HOMENews

Home maintenance: A non-negligible method of faucet cleaning and maintenance

Home maintenance: A non-negligible method of faucet cleaning and maintenance

2023-01-13 09:01:07

Faucets are used a lot throughout the day and are set up in the kitchen and bathroom. As the quality of life gets better and better, many homes have more than two taps. Then how to clean and maintain, so that its service life is longer?

Home maintenance: A non-negligible method of faucet cleaning and maintenance (photo from the web)

1. The ideal cleaning technique is to rinse the faucet with clean water, and then wipe all the moisture on the metal surface of the faucet with soft cotton cloth, because the moisture volatilization will form scale on the metal surface. Gently wipe, do not vigorously rub. Dry with a damp sponge and soft skin to make the faucet shine brightly.

2, the best use of mild liquid glass cleaner, or no acid, no wear soft liquid and completely dissolved powder, frictionless solution polishing agent can remove the thick mask and accumulation on the faucet, do not use any friction cleaner, cloth or paper cloth, and any acid containing cleaner, polishing agent or rough cleaner.

3. After a period of use, if the water output is found to be reduced, or even the phenomenon of the water heater flameout, the screen cover can be gently unscrew at the water outlet of the faucet to remove impurities, and it can generally be restored as before.

4, with a soft cloth coated with toothpaste to clean the surface, and then clean the surface with water, can not use alkaline detergent or clean cloth, steel wire ball to paint, so as not to make electroplating surface damage.

5, single handle faucet in the process of use, to slowly open and close, double handle faucet can not be closed too dead, otherwise it will make the water stop bolt off, cause can not close, can not stop the water.

6. There is generally a foaming device (also called bubbler, different faucet, bubbler is different) at the outlet. Because of water quality problems, the water amount is often small after the faucet is used for a period of time, which may be because the bubbler is blocked by debris.

7, some brands of imported faucet surface plating treatment is quite thick, but also cause its fatal injury, can not be touched or ground by hard objects, so in use, as far as possible to avoid contact with rings and other hard objects.