1. How about a brick sunken bathtub
Brick sunken tubs are great. The size and style of the brick sunken bathtub can be designed according to your own preferences, and you can also maximize the use of space and reduce space waste. Many people may think that only bungalows can be designed with sunken bathtubs, but this is not the case. In fact, many units with sufficient floor height or buildings within buildings can also be designed with sunken bathtubs. The floor height of large flats can reach 3 Rice will do. It is easier to make a sunken bathtub in a bungalow, as long as the depth of the bathtub is dug out from the ground, the width and length can be selected according to the needs, and then waterproof and sewage treatment should be done. The sunken bathtub made of bricks needs to be installed with a drain, so the slope of the bottom layer must be made when tiling the bricks to ensure that the water flows in one direction. In addition to surface tiling, surface treatment can also be done by pouring. Remember to do a closed water experiment to avoid problems and failures in future use.
2. Can a sunken bathtub be installed on the first floor?
The sunken bathtub can be made on the first floor, and it is relatively simple to do on the first floor. It is easier to make a sunken bathtub on the first floor. You only need to dig out the depth of the bathtub on the ground. The width and length can be selected according to your needs, and then waterproof and sewage treatment should be done. After making a sunken bathtub, the water flow will concentrate in the bathtub when taking a bath, and then flow away through the drain in the bathtub, so that other parts of the bathroom will not be wet. The sunken bathtub is very convenient whether you are taking a shower or soaking in the bath. If you take a shower, you can stand directly in the bathtub; if you want to take a bath, just fill the bathtub with water. However, it should be noted that when designing the bathtub, it is necessary to set a lowest point, and then install the floor drain at the lowest point, so that there will be no problems with its drainage. When designing this sunken bathtub, slope treatment should be done under the bathtub to better drain water. In addition, we need to do several more waterproof and closed water tests for the bathtub to ensure that the entire bathtub will not leak.
It can be seen that the brick sunken bathtub is still good, and the sunken bathtub can be made on the first floor, and it is relatively simple to make on the first floor.
