How about a Wrigley basin faucet
1. Select the material
Wrigley faucets are basically made of all copper or stainless steel materials, processed by special processes, and have excellent quality.
2, excellent spool
The spool is an important part that determines the service life of the faucet. The spool of Wrigley faucets is generally made of ceramic. Because the sealing of the ceramic spool is good, even if the faucet is repeatedly switched on and off at a high frequency, there will be no leakage phenomenon, which is very suitable for family use.
3. Good handle
The handle of the faucet mainly has spiral type, single handle, double handle, and 90° switch. When consumers buy faucets, they must ask whether there is a bubbler. Under normal circumstances, Wrigley faucets are equipped with bubblers, which can effectively prevent water from splashing around.
Two, Wrigley basin faucet how to install
1, take out the basin faucet, check whether all the accessories are complete, be sure to remove the dirt around the installation hole and the water supply pipe before installation, and ensure that there is no impurity in the basin faucet water inlet pipe. To protect the surface of the faucet from scratches, it is recommended to wear gloves when installing.
2, take out the basin faucet rubber washer, washer is used to relieve the faucet metal surface contact pressure with the ceramic basin, protect the ceramic basin, and then insert a water inlet pipe, and tighten.
3. Thread the threaded connector into the first inlet hose, and then pass the inlet end of the second inlet hose through the threaded connector.
4, screw the second water inlet hose into the water inlet port, pay attention to the correct direction, force balance, and then screw the threaded joint.
5. Thread two water inlet hoses into the white rubber pad.
6. Set the locking nut to fix the faucet.
7. Then tighten the sleeve.
8. Lock the two inlet pipes and Angle valve interfaces respectively. Do not use pipe pliers to twist the plate to prevent deformation or even breaking. Pay attention to the connection of hot and cold water. Connect the other end of the inlet pipe to the outlet Angle valve.
It can be seen that the installation of Wrigley basin faucet must pay attention to the steps and methods, such as being sure to remove the dirt around the installation hole and in the water supply pipeline before installation, and ensure that there are no impurities in the basin faucet inlet pipe. To protect the surface of the faucet from scratches, it is recommended to wear gloves when installing.
