How important the faucet is to the family, but the faucet is not used directly after you buy it, it needs to be installed, so what if you don’t have an installer in your home? It is too troublesome for others to do it, so let’s do it ourselves, take a look at the installation analysis below, I believe you will understand soon, it can make you a very good installer in minutes.
Thermostatic faucet installation:
The first thing we have to do is to carefully read the installation instructions of the faucet you bought. Then follow the steps it gives step by step. Of course, the installation of this type of faucet must be careful not to say that the hot and cold water pipes are connected incorrectly, and gas and solar water heaters cannot use constant temperature faucets, and hot and cold water filters must be installed.
Shower faucet installation:
To install a shower faucet, you must first choose the most suitable height for the faucet, and the distance between the hot and cold water pipes must reach fifteen centimeters. Remember to flush the water pipes before installation. In the wall, and the plastic protective cover of the spool cannot be removed to avoid damage to the spool. .
Kitchen faucet installation
The frequency of use of kitchen faucets is very high, so the requirements for the stability of kitchen faucets are very high. To achieve this, we must tighten the nuts during installation. At present, there is a new method to enlarge the nuts for the spiral pipes. The fixed faucet has a very good stabilizing effect.
Basin faucet installation:
We use this kind of faucet very frequently, and we have very strict requirements for it. First of all, when we buy this kind of faucet, we should pay attention to the diameter of the outlet and the height of the reserved upper nozzle. Generally, it is downward from the basin. 35 work points are the most appropriate.
When installing this type of faucet, it should be noted that a special angle valve must be selected, and the angle valve must be fixed with the hot and cold water pipes from the wall. If there is a distance between the angle valve and the water pipe on the faucet, it is necessary to purchase a special extension pipe to connect; if the water inlet pipe exceeds the length of the water outlet pipe, a part must be cut off as needed.
