1, chemical removal method
“Before removing the logo stickers on the front windshield, you can first cover the logo with a hot towel to cover the wet, and so on, some stickers can be easily torn off.” Mr. Wang, the owner of the car, said, “Encounter a long time, strong adhesive sign paste, if the front windshield without a solar film, you can use special washing liquid removal, such as asphalt cleaner. If these are not available, it can also be completely removed by soaking it in soapy water or laundry detergent.”
If the front windshield is covered with solar film, you can use a towel dipped in a small amount of alcohol at the logo frequently wipe, but it must not be sprayed directly on the glass, otherwise it will damage the car film. “The front windshield, no matter whether there is a solar film, can not be used to remove the blade and other sharp instruments, otherwise it will scratch the glass or solar film, and a variety of bank cards, membership cards, phone cards are good tools.” Mr. Wang said emphatically.
2. Physical removal method
Physical removal is very simple, almost every house has tools, is used for hair dryer. Ms. Huang, the owner of the car, said that if conditions permit, with a long line plug board will be led to the outdoor power, plug in a hair dryer, in the identification paste around the hot air heating, a while kung fu, can easily open a variety of identification paste.
3. Once and for All method
There are tools available for affixing stickers, such as electrostatic stickers or suction cup stickers. Electrostatic stickers are not expensive, similar to the precious stickers of the mobile phone screen, but the size is slightly larger than the identification stickers. The owner can stick the identification stickers on the electrostatic stickers, and then stick the electrostatic stickers on the front windshield, so that the sticker is exceptionally strong, and the removal will not stick to the front windshield.
Static stickers are disposable, and sucker stickers can be used frequently. A sucker sticker is similar to an ultra-thin photo frame. Place the label sticker in it and then use the sucker attached to secure it against the front windshield. These two tools are easy to install and access, although the electrostatic paste can not be recycled, but can be recycled compared to the suction cup paste, the use of double elegant effect.
