For many families, the toilet is still much more comfortable than the squat, and the elderly and children can also be very safe to use. Now the toilet lid is a new type of toilet lid, but there are many or old toilet lid, because the quality is good, generally will not think of replacing, but permanent will inevitably be broken, this time we remove the old toilet lid, put on a new good. So how do you replace an old toilet seat?
First, how to put down the old toilet seat
Removing the old toilet seat and the new one is the same method, you need to find the two screws that hold the toilet seat. Toilets come in full-packs and half-packs, and most older toilets in homes are not full-packs, so the bolt that holds the toilet lid in place is usually on the side of the toilet, and you can remove the lid by loosening the bolt with your hand or an adjustable wrench. All-inclusive toilet seats usually need to reach into the back of the base towards the tank, find the nut of the lid, and then rotate to remove it. The half-pack toilet lid is usually found in the corresponding position below the cover hole, and can be removed by loosening.
Second, how to install the old toilet seat
If it is a card slot toilet seat, align the toilet seat with the hole in the toilet seat and press the button to install it. If it is a screw, you first need to find the nut on the back of the toilet to fix the toilet lid, use the same type of wrench to unscrew the screw and remove the toilet lid; Then put on the new toilet seat, use the unscrewed screw in the opposite direction to fix it in place, and finally use the wrench to tighten the screw. Some of the nuts of the toilet lid are easy to find, and some cannot be easily seen, so we can find it by hand touch. When replacing the old toilet seat, please pay attention to the installation method, pay attention to the selection of the appropriate screw size, pay attention to the width and length of the toilet seat, so that it is convenient to use after installation.
Third, how to maintain the toilet lid and toilet
1. When using the toilet, please clean and properly maintain, its surface is not dirty does not mean that there is no bacteria. You can effectively disinfect the toilet seat by placing a napkin on it, spritz it with lemonade, cover it for a while, and then rinse and dry it. In addition, remember to place a no-wash automatic toilet cleaner in the toilet tank, which can play a good role in daily cleaning and disinfection.
2. For toilets that are not too dirty, a slightly dirty toilet cleaning method can be used. You can place toilet paper on the inner wall of the toilet, then spray the cleaner or the remaining coke, and then let it sit for a while. Rinse with water and scrub with a brush.
3. After brushing the toilet brush every time, it will inevitably dirty the toilet brush and residual dirt. It is best to rinse and drain with water again, then spray or soak the disinfectant, and then put it in the appropriate place. It is recommended to hang up the toilet brush when not in use, not in a corner or airtight container.
