Frozen wall hanging stove is a very embarrassing thing, it is not very easy to repair, if you do not know whether the wall hanging stove in your home is frozen, you can check the frozen state of the wall hanging stove provided by this site. So, what if the wall stove freezes? Qiding.com will provide you with the answer.
First, how to see the wall hanging furnace is frozen
1. The sealing surface of the water valve body of the wall hanging furnace is deformed, the screw is loose, and water leakage will occur when the wall hanging furnace is opened.
2. The water pump of the wall hanging furnace may break, and it may make a loud noise when opening the wall hanging furnace.
3. The main heat exchanger of the wall hanging furnace will be seriously deformed or even broken.
Two, wall hanging furnace frozen how to do tips
Turn off the gas wall mounted furnace, use a hair dryer to blow air in the frozen position, and touch the wall mounted furnace from time to time to see if the hand is still frozen.
Or turn off the power supply to the gas wall mounted furnace to heat the area around the wall mounted furnace heated by the equipment.
Use an electric heating cable with high safety performance to thaw frozen pipes.
But be careful: don’t turn it on randomly and wait for the boiler to heat up to 5 degrees Celsius or four to six hours after heating.
It is recommended that the wall hanging furnace be frozen. If it will not be thawed, it should be handled by professional personnel to avoid further damage to the internal equipment of the wall hanging furnace.
Three, can the wall hanging furnace be used when it is frozen
You cannot use the wall hanging furnace after it freezes! Because freezing will cause the main heat exchanger and water pump in the furnace to break! At this point, as the stove heats up, water will flow across the floor. If the main heat exchanger and water pump are not frozen, the water in the system will not circulate after the furnace is frozen. After heating, the ice in the main heat exchanger will melt into water. The water will quickly evaporate and expand to exchange heat.
The correct way to do this is to open each panel, find a hair dryer and heat the various parts of the range, mainly the main heat exchanger and water pump, with hot hot air until it feels cold, if there is a frozen part it will begin to drip, if there is no crack then starting the stove will not exacerbate the damage.
