Refrigerator is a must for every family, with refrigerator, we will be convenient in our normal life. With a refrigerator we can ice a glass of water to drink on a hot day, with a refrigerator we can put food in the refrigerator to keep it fresh, with a refrigerator we can make our favorite ice cream to eat. So it’s still very cost-effective to buy a refrigerator. Most people generally do not know how long the newly bought refrigerator can power on, because the newly bought refrigerator first power on is very important, so how long the newly bought refrigerator can power on?
How long can the newly bought refrigerator be electrified?
The newly bought refrigerator should be put on 2 hours and then turn on, and put things on after 1 hour of turn on. Mainly in order to prevent the refrigerator in transport refrigeration oil run to the pipeline, after 2 hours of standstill refrigeration oil will reset, back to the compressor, is to ensure that the compressor in a good state of work, to avoid burning compressor. In addition to first power work for a period of time, the best is to reach the set temperature refrigerator shutdown and then put the food in, which is also to ensure that not to increase the work load of the refrigerator, so as to achieve the purpose of saving electricity.
How to use the newly bought refrigerator?
To pay attention to the location of the refrigerator is reasonable, whether it is convenient for the refrigerator heat. And also need to check the home power supply situation, whether grounding, whether the special line. In the use before the user to carefully read the accompanying product manual, check the various parts of the refrigerator. Home refrigerator using the power supply for more than 220V, 50Hz single-phase AC power, normal operation, voltage fluctuations allowed between 187-242V, if fluctuations are very large or high and low, will affect the normal work of the compressor, and even burn the compressor.
Refrigerator should use a single-phase three-hole socket, wired separately. Pay attention to the protection of the power line insulation layer, shall not re-press the wire, shall not change or lengthen the power line at will. After the check is correct, the refrigerator should be left to stand for 2 to 6 hours before turning on the power to avoid oil circuit failure (after handling the refrigerator). After turning on the power, listen carefully to the compressor in the start and running sound is normal, whether there are pipeline touch each other sound, if the noise is too much, check whether the product is placed smoothly, whether each pipeline contact, and make the corresponding adjustment. If there is a large abnormal sound, should immediately cut off the power, and professional repair personnel contact.
The above is about the new refrigerator how long can power and if use the newly bought refrigerator. In addition to the above-mentioned some of the use of new refrigerator precautions, here the pee also want to add two points. We in the use of the refrigerator when the best at the beginning do not overload operation, because the machine are required to preheat, in general, we still first reduce the load running. Second is we in the beginning of the use of the refrigerator or try not to put too much food in the refrigerator, because this will increase the burden of the refrigerator.
