With the continuous progress of the production process, the heating function of air conditioning, which was often ignored before, has been greatly improved. Whether it is heating effect, or energy consumption control, it is more excellent than the air conditioning in the past. Today, we will introduce how to adjust the heating of air conditioning, and what are the precautions for air conditioning? Take a look!
How to adjust the heating of air conditioning
1. Open the remote control of the air conditioner, and the initial state of the air conditioner is automatic.
2. Click the “Mode” button of the air conditioner remote control, and the adjustment state is successively refrigeration – dehumidification – air supply – heating.
3. After adjusting to the heating state of air conditioning, adjust the temperature of air conditioning. Generally, adjust to the highest temperature when opening air conditioning.
4. At this time, put the air conditioner on the power supply, try it with the remote control, and the air conditioning heating will be adjusted.
Precautions for heating the air conditioner
When the air conditioner is turned on, set high heat to achieve temperature control at the fastest speed. When the temperature is appropriate, change the medium and low wind to reduce energy consumption and reduce noise. When the air-conditioning heating is stable, the room temperature should be adjusted to a small extent to ensure the heating stability. With air conditioning heating room, as far as possible to reduce the number of doors and Windows open and close, with thick, transparent curtains to reduce the room inside and outside the heat exchange. Must avoid blocking the air outlet of the air conditioning outdoor unit, otherwise it will reduce the heating effect; At the same time, choose the appropriate Angle of air outlet, heating flow is lighter than air, so the Angle of air outlet should be lowered when heating, heating efficiency will be greatly improved.
Air conditioning power saving tips
1. The temperature can not be adjusted too low during the use of air conditioning. Because the lower the temperature controlled by air conditioning, the more electricity consumption, so generally reduce the indoor temperature of 6 to 7 degrees on the line.
2, (refrigeration using 26-28 degrees, heating using 18-23 degrees) refrigeration room temperature set 1 degree high, heating room temperature set 2 degrees low, can save more than 10% of the electricity, and the human body is almost not aware of the tiny difference.
3, set the boot, set high cold/high heat, in order to achieve the fastest control purpose; When the temperature is appropriate, change the medium, low wind, reduce energy consumption, reduce noise.
4. The “ventilation” switch cannot be in the normally open state, otherwise it will increase power consumption.
5, less open doors and Windows can reduce the heat outside the room, conducive to save electricity.
6, the use of air conditioner room, it is best to use thick texture curtains, in order to reduce the loss of cool air.
7, indoor, outdoor machine connection pipe does not exceed the recommended length, can enhance the refrigeration effect.
8, installation of air conditioners should be as far as possible to choose the dark side of the room, avoid direct sunlight fuselage. If you do not have such conditions, the air conditioner should be covered with a sun shield.
The above is how to adjust air conditioning heating and air conditioning heating precautions related introduction, I hope to help you.
