Shower room is more and more people like, so how to buy a shower room? The following to recommend some shower room purchase skills, together to learn!
How to choose a shower room shower room purchase tips recommended (picture from the network)
1. Look at the glass
(1) See whether the glass is transparent, there are no miscellaneous points, bubbles and other defects.
Analysis: The making of glass material is not pure or process defects will make the glass have defects such as stray points and bubbles, reduce the hardness of glass, strength and so on.
② See whether there is 3c mark certification on the original glass.
3c certification is China’s compulsory product certification for short, shower room products without this mark can not be sold.
③ Look at the sample of fully tempered glass fragments
Analysis: According to the national standard toughened glass per 50*50mm area safety amount to reach more than 40 grains
2. Look at aluminum
① Look at the hardness of aluminum
Analysis: Shower room aluminum often need to support dozens of kilograms or even hundreds of kilograms of glass weight, if the hardness and thickness is not good, the service life of the shower will be very short, the hardness and thickness of all aluminum is an important assessment index. The thickness of qualified aluminum in the shower room is above 1.2mm, and the glass aluminum on the rail should be above 1.5mm. The hardness of aluminum can be tested by pressing aluminum frame by hand. If the hardness of aluminum is above 13 degrees, it is difficult for adults to deform it by pressing it by hand.
② See whether the surface of aluminum is smooth, whether there is color difference and trachoma, and the profile finish.
Analysis: Second-hand waste aluminum in processing, surface treatment smoothness is not enough, there will be obvious color difference and trachoma, special section finish dark.
3. Look at the pulley
① Look at the material of the pulley and the sealing of the wheel seat
The pulley seat should be made of materials resistant to pressure and weight, such as 304 stainless steel and high-end synthetic materials. The sealing property of the wheel seat is good, the water vapor is not easy to enter the wheel, and the smoothness of the wheel is guaranteed.
② Look at the compatibility of pulley and aluminum track
The pulley and track should be closely matched, the gap is small, it is not easy to fall off when hit by external force, to avoid safety accidents.
4. Look at the adjustment function of connecting wall material and wall clip
The wall clamp is the aluminum material that connects the shower room to the wall, because the tilt of the wall and the offset of the installation will cause the glass of the wall to distort, resulting in the phenomenon of glass self-explosion. Therefore, the wall material should have the function of adjusting the vertical and horizontal direction, so that the aluminum material can match the distortion of the wall and the installation, eliminate the distortion of the glass and avoid the self-explosion of the glass.
5. Check the stability of the shower bar
Analysis: The tie rod of the shower room is an important support to ensure the stability of the frameless shower room, and the hardness and strength of the tie rod is an important guarantee of the impact resistance of the shower room. It is recommended not to use a stretchable pull bar, which is weak.
6. Check the water tightness of the shower room
Analysis: The water tightness of the shower room is mainly observed
① The connection between the shower room and the wall
② The joint between the door and the door
③ Water tightness at the hinge – because the hinge to activity, water tightness is often not good
(4) The connection between the shower room and the stone base and the bottom basin
⑤ Check the tightness of the rubber strip and the rubber strip
7: Look at the product design is humanized
Analysis: boutique rack, sealing magnetic strip, buffer device, whether it is easy to clean, details processing (whether the attached cover is complete, feel smooth).
8: Distinguish acrylic material
The board used in the shower room is mainly acrylic board, it is understood that some composite acrylic board used in the glass wire contains formaldehyde, is the toilet
A source of pollution. The way to distinguish acrylic material is to see the inside of the shower room, if the back of the acrylic plate is different from the front, relatively rough, it belongs to the composite acrylic plate. For example, some acrylic plates will change color if used for a long time, and some will have small cracks. This is also the main reason why some brands of shower rooms are expensive and some are cheap.
9: Automatic water storage shower room
The purpose of an automatic water storage shower is to store the water after the shower for use by the toilet. The utility model is provided with a lower water tank under the shower room, the lower water tank is provided with a water inlet and a water outlet, the water inlet and the water outlet are provided with a discharge and water storage switch; The shower room is provided with an upper water tank, the upper water tank is provided with a water inlet and outlet, and the outlet is connected with the toilet water inlet; A water pump is installed above the upper water tank, and the pumping pipe and outlet pipe of the water pump are respectively connected to the lower water tank and the upper water tank; A float which can sense the water level of the water tank is installed in the upper and launching boxes respectively, and is connected with the contact switch through the float connecting rod; The contact switch is connected with the water pump in series on the circuit. The utility model can automatically connect or disconnect the power supply of the water pump according to the change of water level of the water tank, complete the automatic water storage of the water tank, and use the height drop to automatically provide water for the toilet.
