The shower head is an important part of the bathroom. At present, almost every family will install and use the shower head, so how to choose a high-quality shower head? The following is a detailed introduction to the skills and precautions for shower purchase.
Tips for choosing a shower
Take a look: see if the shower body and the electroplating layer on the surface are smooth and smooth
In humid environments such as bathrooms, the surface of the shower is generally chrome-plated, but the same is chrome-plated, and the process is very different. According to reports, a good pipe body is made of all-copper material, and the surface has to be polished, polished, dust-removed, nickel-plated, chrome-plated, etc. to ensure that it will not turn black, blister and fall off during use. Looking at the surface, the brighter and more delicate the naked eye can see, the better the coating process.
Two grips: Hold the tube with your hand to judge the quality of the material
The same chrome-plated shower, some unscrupulous merchants will use cast iron pipes to pretend to be copper pipes. A simple way to judge is to hold the pipe body with your hand and release it after 2 or 3 seconds. If the mist on the pipe body If it stays around for a long time, it is likely to be a cast iron pipe. If the pipe body hardly changes after leaving the hand, it can basically be judged to be a copper pipe. In addition, the knocking sound of the copper pipe body is crisp and clear, while the sound of the cast iron pipe body is low and muffled. Knocking is also a method to judge the material of the shower pipe body.
Three questions: As the saying goes, laymen watch the excitement, and experts watch the way
Whether the quality of the shower is good or not, the most important thing is the invisible place, so be sure to ask the seller about the material and service life of the shower switch valve core. The valve core of the shower switch is made of ceramics with extremely high hardness fired by extraordinary technology, and its service life must reach the national standard of 200,000 times. Life is inconvenient.
Four picks: let the shower tilt when choosing
If the water output from the top nozzle hole is obviously small or there is no water at all, it means that the internal design of the shower head is very general. Even if there are various water outlet methods such as lasing and spraying, you may not get a corresponding comfortable experience.
Precautions for choosing a shower
The water-saving function is the key point to consider when purchasing a shower. Some showers use a steel ball valve core and are equipped with an adjustable hot water controller, which can adjust the inflow of hot water into the mixing tank, so that hot water can flow out quickly and accurately. This kind of shower head with reasonable design saves 50% water than ordinary shower head. The multi-stage function of the shower is mainly to adjust the water outlet through different water outlet holes to achieve the effect of water saving. The new type of water shower can divide the water into thousands of small water particles like raindrops. The most prominent water-saving method of the single-spray shower is the fully concentrated water column. Although the flushing is powerful, each nozzle will automatically reduce the amount of water.
Secondly, pay attention to whether the shower head is easy to clean, and the shower head accessories will also directly affect the comfort of its use.
The above home network shared with you the tips and precautions for purchasing bathroom showers, hoping to be helpful to everyone.
