First, how to choose a bathroom
1. Look at the pulley
The wheel seat of the pulley should use pressure resistant and heavy resistant materials, the sealing of the wheel seat is better, the pulley and the track should be closely matched, the gap is small, and it is not easy to fall off when it is hit by external force to avoid safety accidents.
2. Look at aluminum
The hardness and thickness of aluminum are important assessment indicators, and the thickness should be above 1.2mm, and the glass aluminum should be above 1.5mm when walking on the rail. The hardness of aluminum can be tested by hand pressing aluminum frame, and aluminum with hardness above 13 degrees is difficult for adults to deform by hand pressing. And whether the surface is smooth, there is no color difference and trachoma, and the profile finish.
3. Look at the glass
See whether the glass is transparent, there are no defects such as stray points and bubbles, and see whether there is 3c mark certification on the original glass.
4, look at the acrylic material
Some of the glass fiber used in the composite acrylic plate contains formaldehyde, if the back of the acrylic plate is different from the front, relatively rough, it belongs to the composite acrylic plate.
Two, usually how to maintain the bathroom room
1, do not force to open and close the sliding door, violent impact is easy to cause damage to the sliding door components. Regular adjustment of the adjusting screw of the slide block can better ensure that the sliding door has better load-bearing and sliding property.
2, regular use of glass water to clean and maintain the glass surface, can make the glass surface to achieve better smooth effect.
3, can not be used with corrosive cleaning agents to clean the skeleton, but also try to avoid toothpaste or with heavy friction brush for rubbing, you can clean neutral detergent.
4, for the spray class of aluminum alloy, in order to avoid the photosensitive reaction between the resin material and the color base powder, direct exposure to sunlight should be avoided.
5, when cleaning tempered glass, do not use corrosive liquids to wipe it, because these corrosive liquids left on the surface will cause its surface to be corroded and affect its performance.
The above is how to explain the bathroom room and how to maintain the bathroom room method of introduction, we must look at it before purchase, usually use and maintenance can refer to it.
