Tankless toilet is a new type of water-saving toilet which does not have a tank and uses city tap water to flush directly. Tankless toilet makes full use of urban tap water pressure and applies the principle of fluid mechanics, so that the flushing water and the kinetic energy of the smart match, the flushing water is generally between 1-3 liters, the water-saving effect can reach more than 50%, not only eliminate the toilet with a tank because of water pollution may cause odor, but also effectively save about 10-20% of the building space; Below, for you to tell the next non-tank toilet selection method and installation method, hope to help you.
The appearance of the tankless toilet is luxurious and elegant, and the product is equipped with the technology to prevent water backflow, which prevents or eliminates the occurrence of negative pressure caused by accidents or artificial water shutdown that makes sewage backflow into the urban tap water network and pollution of the water quality. When using the tankless toilet, the user can not only set the amount of infrared automatic flushing, but also equipped with a mobile sanitary cleaner that can adjust the temperature of the water by the user.
The choice of toilet:
1, touch the glaze of the toilet, to smooth, as far as possible no pinhole, such a toilet after not love to hang dirty.
2. Reach deep into the toilet drain and feel whether there is glaze there, too.
3, open the toilet tank cover, observe the quality of the water parts, press the flushing button, feel its damping sense, the toilet water is good or bad directly affects the durability of the toilet.
4. It is best to let businesses experiment with the flushing effect. A good toilet should be able to flush down 5 or 6 ping-pong balls at a time.
5, sit on the toilet feeling is very comfortable, I believe we have all had the feeling of sitting on the toilet leg numb, so sitting comfortable is also very key.
6, personal feeling, the choice of buffer toilet seat is still very useful, especially at night, can well avoid the impact of the toilet seat banging on the family.
Toilet installation method:
The most important thing to install the toilet is to fix the toilet, there are two common fixing methods, pull burst bolt fixing method, cement bonding method. These two methods have their own strengths, the scope of application is not the same, some of the toilet in the design of the bottom of the toilet design of the installation hole, such a toilet should be used is the burst bolt fixing method.
If this method is adopted, it should pay attention to the position of the ground opening and the installation hole at the bottom of the toilet bowl. The second method is to use the “wipe light” strategy, is generally the toilet outlet and sewer sewage outlet joint smeared with adhesive on the line, but it should be noted that after smeared in the fastest time will be on the toilet and the ground adhesion of excess adhesive wipe clean. To avoid stains on the surface of the toilet.
