First, how to buy the sink
1, pay attention to the moisture resistance of the sink raw materials
When choosing a sink, we must pay attention to the moisture resistance of raw materials. Because the water vapor in the bathroom will be more, the moisture resistance of the raw materials for the sink is very high. Now on the market can often see some of the artificial board made of bath cabinets, its moisture resistance is not good, so it is not suitable as a washing table, so you need to pay attention when choosing.
2, pay attention to the environmental protection of the sink raw materials
When purchasing the sink, we must pay special attention to the environmental protection of the raw materials of the sink. Different raw materials, the environmental protection of the washing table is also different. At the time of purchase, if economic conditions allow, try to purchase some goods with better environmental performance.
Second, how to install the sink
1. Determine the reasonable size of the sink
The height of the sink should not be too low, the sink is too low, you need to bend over to wash your hands, wash up, easy to cause back pain. The sink installation has a standard size, that is, the basin needs to reach the countertop 850mm, the basin needs to reach the countertop 750mm, but the specific situation of the specific analysis, each situation is different. We can look at the actual situation according to their own, the height of the general sink needs to be determined by combining the height of the family, generally about 80cm from the ground, and another, If the sink is too shallow, the tap is easy to splash water on the body, so the sink must choose the deeper kind, and the depth of the sink needs to be proportional to the strength of the water flow of the faucet, that is, the stronger the water flow, the deeper the sink is, so that there will be no embarrassing scene of a boiling tap water will splash on the body. And the basin of the sink should not be too flat and must have a curve, which is the same as whether water droplets on the ground and water droplets in the basin will splash out.
2. The height of the sink should be higher than the countertop of the sink and the sink must be smooth
If the sink is lower than the sink, it is easy to cause water to drip to the ground and dirty the ground. The height of the sink is higher than the sink, the water will drop on the surface, and a gentle sweep can sweep the water back to the sink, and it can flow away along the current. And in order to avoid collision and easy to clean the sink, the table top of the bathroom must be smooth.
3, pay attention to the installation requirements of the basin
There must be a distance between the basin and the wash basin, otherwise it is easy to cause collision, and it will cause inconvenience in the process of use. Secondly, before the installation of the basin, we must do a good job in accordance with the size of the basin and reserve the installation position of the basin, and install it step by step in strict accordance with the installation steps of the basin. After the sink is installed, you can connect the water pipe and check whether there will be leakage.
It can be seen that the purchase of the sink needs to pay attention to relevant factors, such as must pay special attention to the environmental protection of the sink raw materials. Different raw materials, the environmental protection of the washing table is also different. At the time of purchase, if economic conditions allow, try to purchase some goods with better environmental performance.
