Ceramic tile in the use process often loose, falling off and other problems, is because now ceramic tile paste accepted cement mortar bonding fastness is not enough, and the durability in a wet environment, is easy to loose and fall off. There is a way to accept the resin binder paste ceramic tile, the strength can not only reach or cross the body strength of the ceramic tile, and the durability in a wet environment will not cause fall off.
Ceramic tiles in sanitary ware are often stained by grease, rust, soap scale and so on. In order to keep the porcelain surface clean and not damage the brightness of the porcelain surface, you can use multi-effect decontamination ointment to clean. As for the crack of ceramic tile, you can first use a brush dipped in a little decontamination paste to remove dirt, and then brush a waterproof agent at the crack, which can not only prevent water seepage and prevent mold growth.
It is worth mentioning that a large number of cleaning disinfectants used in the home now contain chemical substances such as acid and base which have a great influence on natural stone, reflecting the bad fortune of the stone outside color and internal mineral status. Particularly serious is that most of the detergent must be reflected outside the stone for at least five minutes to be useful, but during this time the detergent has damaged the stone, so that the acid and alkali value of the detergent should be accepted outside the stone of the bath room.
