How to deal with loose wooden chairs? Can the wooden chair fix itself if it is loose? The answer to this question is in fact the need for specific problem specific analysis, sometimes the loosening of the wooden chair may be because of the loosening of the screw and other components, this as long as a twist can be used directly, but sometimes because the function of the wooden chair itself has problems, if this is the case, it may not be very convenient to deal with their own, Need to find outside professional workers to repair, today seems to introduce some ways to deal with the loose wooden chair, hope to be really effective to help you in need of owners.
Pure solid wood chair to the process and material requirements are very high. Solid wood selection, drying, finger joint, joint and other requirements are very strict. If the control of any process is not strict, there will be cracking, loosening at the joint and other phenomena, and the whole set of furniture will be deformed and unable to be used. The other is imitation solid wood tables and chairs. The so-called imitation solid wood tables and chairs are solid wood tables and chairs from the appearance, the natural texture, feel and color of wood are exactly the same as solid wood tables and chairs, but in fact they are tables and chairs mixed with solid wood and wood-based board, namely the side board top, bottom, shelf and other components with thin wood veneer particleboard or medium density board fiberboard.
Doors and drawers are made of solid wood. This process saves wood and reduces costs. A set of imitation solid wood bedroom furniture price should be in several thousand yuan, and all solid wood furniture at least 10,000 yuan more; Consumers can not through the price identification, must master the identification method of solid wood.
The majority of solid wood bending furniture is chair furniture, and the seat surface and back of this kind of chair are mostly rattan woven. Because the rattan service life is shorter than solid wood furniture, the edge and surface of rattan furniture may be broken or worn after many years of use, in this case, it is necessary to replace the rattan. In addition, it is unwise to repair only part of the cane, for the strong new cane will bear the weight, and parts of the old cane will soon be broken, and the whole weaving will have to be done again. Of course, rattan, more than any other material, requires no special maintenance and can be cleaned with a feather duster, paint brush, or even a vacuum cleaner, but don’t get it wet while cleaning other parts.
To repair, remove all the old rattan and carefully remove any paint or grease from the seat frame with steel velvet. Then, it is to carry out the work of rattan weaving. It is also important to emphasize that the size of the new cane should be as close as possible to that of the old cane. Now take an octagonal hole rattan pattern as an example, to indicate the order of compilation. Start by taking a long cane and attaching it to the first hole with a wooden nail, then proceed as shown, but be sure to keep the glossy side of the cane facing up.
Pull the vine tight, but not too tight, because the vine will dry to produce a certain amount of shrinkage. When the cane reaches a certain length, it is fastened with another peg and the next hole is made. At the end, leave the ends of the rattan loosely underneath and tie the knot after it’s all braided. In the final processing, select a section of perforated side rattan and a long section of very thin rattan, they are fixed in a corner with nails, perforated side rattan on the top, slender rattan eminence next.
Lay the through-hole side rattan flat along the edge of the braid. When passing through the next hole, lift the thin rattan and place it on top of the through-hole side rattan and return to the same hole to form a loop to hold the through-hole side rattan in place. Work the same way around the seat surface, securing it with a wooden nail at the last hole and pressing the cane end under the surface of the wood with a nail punch or small awl.
Finally, the new canes are treated with thin strips of wood, which are painted at both ends to the same color as the old wood. The color modulation can be tested on a section of discarded canes. If you need a bit of mercerizing feeling, after coloring can be matte finish on the surface. It should be noted that these modifications should be carried out with cotton balls, because the effect of brushing synthetic resin with a brush is completely opposite to the temperament characteristics of solid wood curved furniture.
There is no need to be too nervous about the phenomenon of wooden chair parts falling off. First of all, protect the parts that fall off and try to fix them in place. You can tie it to the furniture with thread of the same color and wait for the repairman to come and fix it. If it is a drawer or part of a cabinet, it can be placed in the cabinet and drawer. Don’t put it randomly, so as not to lose it or forget it for other reasons. Because each piece that falls off is unique, it’s almost impossible to find an original piece. In addition, if the furniture is too loose, you can tie it with rope or put it in a sack, and then find an expert to repair it as soon as possible.
In fact, the best way is to care for the furniture, find problems in time to deal with, to avoid greater problems. In a word: early found, early fixed.
