The shower is an indispensable part of our life, so we should pay attention to cleaning and maintenance in our daily life, otherwise it is easy to cause the shower head to be blocked, so how to deal with the blockage of the shower head? What are the options for the shower? How? Let’s find out with me.
How to deal with the blockage of the shower head? What are the options for showers? _1
(Photo source: Golden Sanitary Ware official website, invaded and deleted)
1. How to deal with the blockage of the shower head?
1. If it is found that the shower nozzle is blocked during use and the water cannot be discharged, first of all, the switch of the shower should be turned off and stop using it. Do not continue to use the shower if it is blocked, otherwise it will easily cause damage to the water pipe connected to the shower.
2. The blockage of the water outlet of the shower is often caused by the accumulation of impurities in the screen cover. After a long time of use, the shower will inevitably have scale deposits. If it cannot be cleaned, some spray holes may be blocked. If the shower head is partially blocked, you can first put water to see which holes are blocked, and then use a needle to pierce the blocked hole with the needle to pierce the impurities in the hole until there is no debris in the hole, but be careful not to puncture the shower hole.
3. After cleaning the blocked stains on the shower nozzle, put the nozzle back to its original position, then turn on the water outlet switch, and observe whether the nozzle can produce hot water normally. If the water can come out normally, it means the repair is done.
2. What are the ways to choose and buy showers?
1. The water output of the water outlet. When we choose a shower, we must first look at the water output of the shower outlet, whether it is a top spray or a hand spray. The water output of each outlet of a good shower should be basically the same, and we should avoid choosing showers with uneven water outlets.
2. The water outlet strength of the water outlet, the water outlet strength of the shower outlet must be moderate. We feel uncomfortable when we use it if the water outlet is too small. We feel that the shower is not smooth enough, and if the water outlet is too strong, it will feel stinging, and it is easy to waste water.
3. Shower head material. When we choose a shower head, we must choose environmentally friendly materials. The materials used in the product should not pollute the water quality, and at the same time do not buy those materials that are easy to corrode.
4. It is easy to clean. After the shower is used for a long time, it is easy to form scale and other dirty things inside. We must pay attention when purchasing, avoid purchasing wire mesh covers, and choose plastic surfaces that are easy to clean. , of course the best is the silicone outlet.
5. The coating is smooth. Many shower products on the market now have a coating on the surface for the sake of beauty and texture. Therefore, when purchasing, you must carefully observe the coating on the surface of the shower. You must choose those that are smooth, flat, and free of cracks.
